I only set my LDT to auto for a 300MHz HTT, but on some mobo, 3x LDT may be required.
BTW... I believe your stepping should be 0528UPMW... not 0328UPMW
2003 they dun have palermo yet
Sempron64 2500+ , 2800+ OC tests
|
|
 Aug 28 2005, 10:00 PM
|
 
VIP
15,903 posts Joined: Jan 2003 From: Miri   
|
Cyclone,
I only set my LDT to auto for a 300MHz HTT, but on some mobo, 3x LDT may be required. BTW... I believe your stepping should be 0528UPMW... not 0328UPMW 2003 they dun have palermo yet |
Quote|
|
|
|
|
Aug 28 2005, 10:07 PM
|
 
Senior Member
1,254 posts Joined: Jan 2003 From: Penang 
|
Oops..typo...
|
|
|
Aug 28 2005, 10:12 PM
|
Senior Member
1,796 posts Joined: Jan 2005
|
cyclone87, u use icute450 twin fan to OC? will it stable?
|
|
|
Aug 29 2005, 03:09 AM
|
Senior Member
1,651 posts Joined: Jan 2003
|
means u r running over 900 bus at HT X3?
possible ar? |
|
|
Aug 29 2005, 06:07 AM
|
|
Senior Member
1,254 posts Joined: Jan 2003 From: Penang
|
QUOTE(wtm0325 @ Aug 28 2005, 10:12 PM) cyclone87, u use icute450 twin fan to OC? will it stable? It kinda weird. That icute psu give me very good rail on NF8 even at high voltage n mhz. The +12 never go above 12.10 and never below 11.98. Same goes to +3.3v and +5v. Even some purepower oso cant be that good. I gonna stay with icute for this mobo. |
|
|
 Aug 29 2005, 09:53 AM
|
Senior Member
3,795 posts Joined: Jan 2003 From: .: Old Klang Road :. 
|
QUOTE(Malaysian @ Aug 28 2005, 07:59 PM) i believe they only running the HT X 2..not X3 or X4 they only getting 350.4*2 =700.8..i think it's impossible to get X3 HT which is 1051.2 bus. AMD sempron running 800 Bus... and they already set higher voltage QUOTE Anyway it is proved that the LDT freq between 400MHz & 1000MHz doesn't give any advantage in perfromance or anything at all. From DFI Street Forum. |
|
|
|
|
|
Aug 29 2005, 12:09 PM
|
|
VIP
15,903 posts Joined: Jan 2003 From: Miri
|
very very true indeed. what most important is the clockspeed, because the FSB is running at full clockspeed
|
|
|
Aug 29 2005, 02:30 PM
|
Senior Member
3,140 posts Joined: Jan 2003 From: Sitiawan, Perak 
|
QUOTE(Cyclone87 @ Aug 29 2005, 07:07 AM) It kinda weird. That icute psu give me very good rail on NF8 even at high voltage n mhz. The +12 never go above 12.10 and never below 11.98. Same goes to +3.3v and +5v. Even some purepower oso cant be that good. I gonna stay with icute for this mobo.  this case same as me ... last time i also using cipak psu... n their +12 also stayed at 12.10+- .... all other rails are darn stable high voltage as well... but i'm quite scare those psu will blown anytime.... so i ended up buying a enlight 420w which is low rails low +12 everything low... so it's ur choice  |
|
|
Aug 29 2005, 02:36 PM
|
|
Senior Member
1,254 posts Joined: Jan 2003 From: Penang
|
 Gonna rest after this. Tired priming and test stability. I still on stock heatsink +DeltaFF 92mm and so gonna stop around 340HTT until i get a better 1 . My icute giving me good rail on this mobo. But on other mobo, it only 11.5v for +12v.  This post has been edited by Cyclone87: Aug 29 2005, 04:39 PM |
|
|
Aug 29 2005, 03:24 PM
|
|
VIP
15,903 posts Joined: Jan 2003 From: Miri
|
wah wah... so easily can do 2.7ghz!
palermo rocks! |
|
|
Aug 29 2005, 05:26 PM
|
Senior Member
4,784 posts Joined: Sep 2004 From: MY
|
congrats dude..
even my a64 winnie cant do that  |
|
|
Aug 29 2005, 05:33 PM
|
|
VIP
15,903 posts Joined: Jan 2003 From: Miri
|
this palermo E6 is the lil bro of venice
|
|
|
Aug 29 2005, 07:29 PM
|
Senior Member
3,966 posts Joined: Jan 2003 From: Kuala Lumpur
|
wonder where i can get the E6 revision...robyncom selling?
|
|
|
|
|
|
Aug 29 2005, 08:49 PM
|
|
VIP
15,903 posts Joined: Jan 2003 From: Miri
|
look for any sempron 64 ... it should be the E6 stepping
non64 sempron should be either D0, E0 or E3 |
|
|
Aug 29 2005, 09:37 PM
|
Junior Member
197 posts Joined: Sep 2004 From: Kamunting, Perak Darul Ridzuan.
|
off topic & noob question...this nf8 mobo does not do dc right?...
|
|
|
Aug 29 2005, 09:40 PM
|
 
Elite
4,424 posts Joined: Jan 2003 From: Singapore 
|
all socket 754 dont if im not mistaken
|
|
|
Aug 30 2005, 03:12 AM
|
|
Senior Member
1,796 posts Joined: Jan 2005
|
QUOTE(Cyclone87 @ Aug 29 2005, 06:07 AM) It kinda weird. That icute psu give me very good rail on NF8 even at high voltage n mhz. The +12 never go above 12.10 and never below 11.98. Same goes to +3.3v and +5v. Even some purepower oso cant be that good. I gonna stay with icute for this mobo. u make me wanna keep my icute  btw there is nf8 n nf8-v, nf8v seems cheaper n support raid, will it hv a big difference in OC? my epox 8rda+ kong edi, if cant repair hv to switch to s64 to suit my budget n OC needs  btw izzit s64 3000+ & above got cool n quiet tech oni? This post has been edited by wtm0325: Aug 30 2005, 03:31 AM |
|
|
Aug 30 2005, 03:51 AM
|
|
Senior Member
1,651 posts Joined: Jan 2003
|
yes
CNQ...not for overclockers |
|
|
Aug 30 2005, 03:33 PM
|
|
VIP
15,903 posts Joined: Jan 2003 From: Miri
|
QUOTE(KilJim @ Aug 29 2005, 09:40 PM) all socket 754 dont if im not mistaken exactlys-754 = single channel s-939 = dual channel |
|
|
Aug 30 2005, 03:35 PM
|
|
Senior Member
1,254 posts Joined: Jan 2003 From: Penang
|
Kinda down with my mobo. It limit at HTT 345 FSB. I gonna let this 2800+ and grab at 3100+ with 9x multiplier. Hope can hit lot higher . Will update soon.
|
| Change to: |  0.0220sec
 0.11
 6 queries
 GZIP Disabled
Time is now: 28th November 2025 - 12:16 AM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.