do not prime yet..cause must find setting for tccd first..

he is running 1.6vcore.
and remember, CPU-Z alwaz show under-volt for Processor.

owh..sory my mistake..1.6v for 2.95Ghz..how about ur proc temp mate?

after found pls tell me oso

The pair 2x512MB XMS3200 v1.4 finally sent for warranty already.
have to wait until mid of next month only able to get it.

Hopefully is a not bad pair.

so pening la alway failed when try to prime large fft stress ram for 250mhz only....but small stress proc ok past...

try my gskill la..hehehe.. i think TCCD and TCC5 will giv diff result

lazy to take out the ninja la...after exam la i think will settle out...
hehehe..

ok..test it kau� k..and tell us the result

My Corsair XMS3200 TCCD doesnt like high clock

At low clock (below 230MHz), the timing can be super duper tight with only 2.67V, but once it goes above 230MHz, things started to degrade.

I've tried DDR500 (2.5-4-4-8) and the other misc timing at very loose side. Drive strength set to weak 4 (7) and data strength = 1 and 4, prime a while already give me serious error. btw, I've tried 2.7, 2.8 and 2.83V. Takkan DDR500 already need 2.9V !!

not really.... both use similar kind of setting

in fact... they're just the same die

got an team xtreem ddr600 running on my asus board, failed to run ddr600 stable, failed prime after 3 hours 58 minutes... using a64 tweaker to tweak the clk per cycle and others such as drive strength to weak also no help, anyone got idea for me??

Try....

Read Write Queue Bypass = 16x
Bypass Max = 7x
Max Async Latency = 8ns
Read Preamble = 6ns

Juz wanna ask sumthing
The PATRIOT XBL PC4800 DDR600 rated can do FSB250 2.5-3-3-7, but i cant Memtest is stable. It hang at Test5, does this mean the ram is sumhow defected?

BTW,im using Intel. So this means i wun achieve FSB250@2.5-3-3-7 since i able to Memtest FSB240@2-3-3-8.

Thnks.

This post has been edited by KahLooN: Apr 26 2006, 03:06 PM

i cant even do this at DDR500 stable, with 2.5-3-3-7 @ 2.8V

wahh..very hard to tweak TCCD when it pair with TCCD

For me low RAM speed + super tight timing is pretty easy. But once it reaches 240MHz above, it started to become unstable. Maybe my RAM is too hot?

mine also like that la...
at ddr400 no problem prime 10hours 2-2-2-5

now im doing 221mhz at 2.5-3-3-6, 1T @ 2.7vdimm
stable

same prob with me...dunno what else to do...prime large fft always failed