Already answered you in Hardware Q & A section... Don't post the same question in 3 places

i'm looking a database for P4 524 3.06 Ghz(prescott).anyway,there are 194 pages,so hard to find...if anyone knew where can i find it,let me know..

i just tried OC my Pentium D 805 from 2.66ghz to 2.96ghz.. but when i try to OC to 3ghz.. the system fail in booting..had try to increase the VCORE for processor, but still failed.. any recommendation?

Hardware info:
Enermax FMA II 460w
Sapphire ati 3870 512mb ddr4
2 harddisk, 1 dvd write
1gb ddr2 ram + 512 ddr2 + 512ddr2
2 cooler master fan

Hi guyz,im a noob in this section.Can my processor:Pentium e2180 2.0ghz & my motherboard:msi-7507 good for overclocking.Help me out here
& u all say my CPU how high i can go le?

Muz depend on ur mobo overclocking features...n ur hardware too... So, u muz try to increase ur frequency & voltage of ur (CPU, RAM, divider) step by step to reach the stable clock n performance..

when we know we reach stable clock and performance?

can boot window lo n run several benchmarking tools... If passed...gud news to u...

i just know how to adjust fsb
i have tried it..sometimes ok, sometimes really hates me

another value do i must adjust to selain fsb??

help me plz

thats why we increase the vcore when overclocking

Yup, u're rite...Add the vcore until it stable to run n passes the benchmarking tools...

and remember the higher the vcore the hotter the proc will run.

ok thanks..
wait for me to buy good psu 1st.
currently cap ayam..

anyway anyone hav mobo n proc same type as me (e2180 n msi-7057??)

ur mobo is quite rarely used ..

Hey overclockers

I hv a problem with my overclocking. Currently using P5Q dlx to overclock Q9550 to 3.5ghz. Using 4gb DDR2 1066 (Crucial ballistix)

Heres my setting :-

Vcore = 1.25v
Vtt = 1.10v
Dram voltage = 2.1

Now, i stress it on prime95 n OCCT...it was stable but when i restart, the machine runs but no display and worst of all the lights on the RAM doesnt light anymore.

Please help thx

have u tried resetting the CMOS????

Cmos reset almost 3 times. Cant figure why my CPU stable but RAM isnt running at all after restart

Sounds like ram problem to me.

Isolate the issue. Test the RAMS in another rig and see if your rams still work.

this is my new setting and it works perfectly after 8hrs of prime95 and 4 hrs of OCCT

FSB : 380
Timing : 5-5-5-18-3-40-6-3
Vcore : 1.3
Dram volt : 2.2
Vtt : 1.20

now, when i change the fsb to 412 and ram timing to 5-5-5-18-3-20-6-3. It didnt work anymore. The rest of the settings i remained the same. Please advise thx

what ram are u using?

is the 20 is supposed to be trfc?

kinda imposible to be stable at that trfc imho...

jsut my 2 cent... too long didnt play with ram liao

E8400 E0 @ 4Ghz w/ thermalright ultra 120 extreme @ def vcore prime stable for 24hr
Team Xtreem PC-8500 @ 1068Mhz @ 1.8 vdimm



This post has been edited by miloXD: Jan 17 2009, 12:05 AM