People who built the CPU has a minimal of a Masters Degree or better yet PHd.
People who manufacturer is has a minimal of Bacheclor' Degree or better yet Masters Holders
People who tested it also have the scrol of Masters
People who wrote the EULA, Warranty Disclaimer, Designers has also a minimal requirements of Masters or Bachelor's.
People who is going to check ur CPU,Mobo will hold what u think????

They know..but sometimes they miss....sometimes they ignore...and sometimes they just return the CPU to u and say "Damage due to overclocking....Warranty void! Any disagreements can proceed with High State/Federal/Capital Supreme Court via repectative countries".

ooo
thanks for ur infomation

mr.. zorro.. u r scaring him off

btw..d chances ur burns ur proc is very low although not zero.. jus make sure u monitor ur temp...

such a ayat adjective
well thanks antonio_zth

dats why frm the beginning u need to read a lot of info about it.. then only u can start doing it in the safest way or properly w/o any bad result..

thanks for the help for ppl here
really appreciate it
well,what the temp is safe for a pentium4 prescott?

try get a full load at 40c....then u are at the safe side....

i'm not scaring him....

its what i think evertyime i overclock...

40'c i think is not that easy for this moment coz i am using stock HSF
anyways,
thanks for the infomation for my further OC with some more decent HSF

well the only thing that will cause P4 chips to void warranty is over-voltage. temperature is nto really a problem (though yes, it will affect stability), but when it gets over the threshold voltage, the back-throttle will kick in and you will know you have somehow reach the temperature limit of your processor.

some have mix views about msi CC. i had pretty good experience with it getting my 2.8B up to 3.6 without changing its Vcore, but its still better for u to use cmos cuz DOT isnt really that reliable...its not intelligent enough to back down when it needs to and doesnt know when to stop increasing its FSB automatically.

if u want to OC "on the fly" from windows, get clockgen.

and be sure to increase ur ram voltage to about 2.7-2.8 first...

thats why i quote 40c...coz u cant right now...if i say 60c then u start to ish a bit than start to twiggle the BIOS...

whaaaaattt ....40c is like impossible for full load for prescott..even now i use xp-120 idle 37 full load 55..

try peltier for a change????

what is that "peltier" boss??

some thin layer of film which cools the chip down with electromagnetic technology i think....i cant remember.....something to do with electric lar...highly effectve but also very fatal if u dont install properly.

yupp... b4 oc'in better get good hsf and also psu...

i guarenttee u will on d safe side wit that temp..




or for a change use water coolin.. or nitrogen...

ROGER!
btw,how bout the powerlogic atric500T
is it good?

ermm.. i see that psu b4... quite heavy.. but not recommend u coz it not liked by oc'er.. try get d better quality.. see d discussion.. best psu for lowyat oc'er

btw..still not sleep yet a? waiting for arsenal vs wigan match

ha u are arsenal fans also??
not,i am finding the review of z800
btw ,u got this review?
well,i just want to know is that z800 got OS or not searh thruoght the net and find but didnt got result until now
btw,u avatar really makes ppl feel like make our eyes