finally someone from metalzone bulk... okay. hurry up with the results and setup pics (with ya new stacker )

Performance wise of the rad.. think it's safe to say will not differ much, performanc of the whole w/cooling systems, depends on the resistivity/restrictivity of the block, pump heads, loop lengths, etc. etc. you see watercooling wasn't just an out of the box all is orait thinggy.. it's an art of tweaking, customizing and pairing/combo of parts and tubes displacements... but now you'll already past the newbie w/cooling wetness, let me really welcome you the wet side of the force

not bad at all, errr, seriously it's the first time u using AS5 accordingly?

wei.. hurry up lar with the result.. and pics.
Possible? yes... bear in mind the word "OVERKILL".. the purpose of having a dual or tripple radiator or pump is to get the right equation in getting rid of the heat load from a system.. alas comes the c/w, the rate heat dissipated per sec or minute... but it all comes down to the ambient temp in which is the lowest temps the bestest, terrorrest, marvelousest watercooling set/kit can give... which to date is still non existant. I mean there is no point of having a triple heatercore just to cool of a 200W cpu.. it's just a waste of space, time and money.

Ya lor, the 486DX clan now need a new chairman. The last chairman converted ledi... just because he bought two sticks of 1G ram that kenot tweak to the max with his 486DX.. , huh, what a sorry sore @ss excuse to convert. .. neway congrats sargeant of the promotion jgn. mare.

a triple core cpu. Triple X rated one... lots of udang. ucai, can show pics of your res? Legends says that you've modded a Glade refil container into a cylindrical res which almost similar to hollowbean's. show it here lar.

.. wow.. i'm with sargeant.. where can we get that res? Pleeaasssseeee.

This post has been edited by amok: Feb 16 2006, 04:42 PM

great... now oni need a casing.. heheh, btw, mebbe you can shorten the line a bit, might gain a few cm heads.

wada i miss wada i miss? TJye, screen shot, cpuz + mbm5(or whatever that shows Vcore + temps) please..

Yup should be lower, then again I've used the DD double hc b4, and there are a few things that you should take into consideration when using the double HC.

1. Surface area for heat transfer for the double HC is very VERY HUGE... which comes to choosing the right fan for heat transfer efficiency... I'd had to use a 75cfm fan at least.. then 2 x 120mm fans still wouldn't cover all the area of the HC, thus comes suggestion no 2 below.

2. HC is not a rad... you'll need shrouds, to focus the air through those thin flat tubes and not creating turbulance or any back pressure that oni circulates hot air.

3. as always I'll ask for pics, hard to diagnose anything without pics of setup.

meanwhile, just wait for the thermal past to fix, then lesse what the readings are.

errr... nice paint job ianho...

Tubings could be improve. Too much G-force for the pump to handle... loosing unnecessary heads.

MY 2 sen oni.

For the pump Qmax 1500L/H, Hmax 1.5m one, can you get the power consumption e.g. 50Watt, 70Watt, 28Watt.. if the pump needs more than 50Watt, then ferget about it.. just get the nirox p2800, it'll get the job done.

Well brother waterer, when is the surprise w/cooling kit preview?

can:D .. match it wif a low resistance block... then put in air cond room sure geng... no seriously... can geng (even without the air cond room)
bro ferget to ask, you're planning to use it wif what water block.

O.T.... LONG LIVE DIY WATERER

err.. bro, it all depends on yer budget, I wud suggest the STORM G4, but it's quite hefty.. cause it needs a high Heads pump to match with... which is quite hefty oso. and the cheap ones(pump) had a lot of thermal dump issue to the loop..

Well, metalzone is our current xtreme watercooling bulker right now, and there are some interesting choices that you can pick from his bulk.

Why not save a little and wait for Metalzone's Maniac Watercooling Combo that beat the crap out of all the taiwanese kit (sorry mod, you're free to edit this cause i've got carried away) to arrive in a few weeks time.. I hope.. (bro david you'd better ready with the kit, i've put my a$$ on the line here bro).

errr... if i'm not mistaken look for those low resistivity block such as MCW6002, apogee, maze 4, somewhere along that line.. please refer to the watercooling guide's sticky/pinned thread, i'm sure there's an answer there...

bro TDK or RBX is not one of em for the nirox......

shah81 .. well done man.. sargeant told me about this and I'm here to racun you sum more.

You see most of us watercoolers doesnt have the moolah to start off this watercooling hobby with a 12VDC pump... hell even when I start off, I'm just using a 240V, 8W, 300Lph, 0.8MQmax.. siamese pump...

Thus comes the needs/demand for a auto switching AC pump. The criticool's is waayyy above our heads..

Now you've came out with the schematics and wiring diagrams it really help us all (the rectifier thing is really cool, i've never thought of that).

But unfortunately not most of us can read those diagram.. so like sargeant said... "Do provide the service to this community".. and earn a bit while in the way

and by the way.. those from Mzone bulkers.. where's the results? espcially those "budget kit".

..aiyaa.. tak payah susah2 lar bang.. sell both to almostthere... .. me oso electrical, electronic & mechanical background.. made one ledi a loooonggg time ago... i'm still complimenting the use of a rectifier/diode on the circuit.. (i'm old timer ledi "

DaBaD....UGPM.

ok lar.. i support oso from behind.....

shah@ good mod bro, keep um coming.. try modding a resevoir from glade's car freshner refil tube like zahri's and add bling-bling sikit... (leds, fans, etc.)


zahri@ sorry to say this but P2800 wont cut for a dual rad system.. too big restriction... the water will just "meleleh" oni.

uzai@ pam problem settle led?

ianho@ nice mod man.. mebbe can custom made some top for DDMaze4 and make it universal mounting. (old skool block user here)

to tell y'all the truth..... I'M TOTALLY LOST!!!.... so stop hurting me and yourselves.

Question by mADmAN = comparing 2 barbs with 3 barbs waterblocks... which is better/preferred and why?

I'd rather you'd compare the water block resistivity-> water contacts rather than numbers of barbs... cause there's no definite answer if comparing barbs.. it's the w/block(design for heat transfer via surface area -> c/w) that determine the best blocks...some blocks design uses 2 OUTFLOW barbs cause (in simple PLAIN INGGERIS) to create a lower pressure point than the INFLOW... elementary fluid dynamics... water flow from high pressure to low pressure... so in theory the more the OUTFLOW barbs the merrier it is... right? hehehe there's more to it than that. read on

In some design, geniuses uses the INFLOW pressure not oni for jet impingement effect but simultaneously creating turbulance to further increase the surface contacts with thermal median.. turbulance will oso dampen the kinetics of flow which in turn lowering pressure of flow (a good example is the G4 block... the cups, channeling and such).. thus a single OUTFLOW barbs is adequate, without sacrificing the thermal transfer efficiency.

but.. imagine if the G4 uses a dual/triple/quadruple barbs OUTFLOW.... okay ladies, some food for thouhgt.. lemme know what you ladies think and why.. I think that's a healtier reply post rather than spam like post... (no offence).

ucai@.. try finding Laing retailer, mebbe can order/repair parts from them.

Good News to all Water Cooler Enthusiast.

Now we have another supplier whose bringin in Danger Den Products to this Forum.

So lets Recap:

1. Danger Dinster's Danger Den's Watercooling supply.

2. Metalzone's Maniac Swiftech Supplies

hehehe just like WWE Monday Night RAW... so ladies, get your watercooling kit from em...

ps. (hint, hint, check out Danger Din's budget kit )

edit/O.T.: so now it's my turn to spam. , fair what.

This post has been edited by amok: May 29 2006, 09:56 AM

hahaha... akhirnya kau masuk air jugak.


Neway any temps results wanna show off? or... still havin problems on the mounting?