thats from aqua computer if im not mistaken. its a german company making WC stuff, damn cool and damn expensive i presume. their pump/reserviour looks AWESOME

so which brand should i go for

TT,GBT,Swiftech and bla bla bla

I'd say either the swiftech's and the GBT...other's don't bother...you'd be wondering what's the fuss about with WC'ing if u used those

SEPAM:

Boys and gurls... d sniperz coming to the wet side.

Just ordered me a Storm

And sucessfully bid for it I might add...about RM200/= only .Now for the pump, rad, tubes, cklamps, coolant and the res

RM200 for a storm???!!!! GRRRRRRss lucky b@5t@rd!!!! , welcome to the wet side... again...

TJye: for a second i thought you've got some one in M'sia that sell the 50Z pump..

Mmm.. at the moment, the seller still hasn't replied his mail but the plan is as follows:

Swifty Storm cpu
Maze4 acetal gpu ( gotta still find this..expensive here)
12x1 Rad
http://www.kp-xpcmods.com/osc/index.php?cP...bbcbb58db04f00d
MCP655 pump
1/2" tubes
Closed loop until I find a res or make one.

Whaddaya think?

And I need a DFI NF4 compatible NB cooler... objective is for silence.

That is 1 badass setup
but I think a 2X120mm would do alot better to handle more heat loads

And the mcp655 on the site you link is really cheap its only nt2500 about RM280 only

This post has been edited by TJye: Oct 19 2005, 02:14 PM

Heheheehheheehe TJye and amok...just a teaser for you guys since it's a few more days before we pick these up

hey, serious h/ware you've got there... yup i'd second TJye might need a bigger heatxchanger if you're into hard core ocing with : 1. cpu w/block 2. gpu w/block 3. nb w/block... then again if your 120X1 is jammed with a serious ass fan (can I use ass?) e.g. wif a 135cfm fan I think it should do just sweet.. apart from the noise the fan make..

Oh yeah, oh yeah come to popa.. i'll pump you up good

TJye@ whad pump you're gettin'?


EDIT: GUYS!!! this is worth checkin'.. TQ for evildonkey
CLICK LINK

This post has been edited by amok: Oct 19 2005, 09:48 PM

almostthere: Oh yeah finally after almost 3 months.....and btw
what pump will you run the G4 with?

Amok: I dunno ler, still thinking about going all out for a d5 or going for some aquarium pump for the mean time.......... What about you?


I do read about d5 vs 50z over @xs and maxxraccer did point out that d5 do work better with more components, say if I were to add a gpu block, this point is again second by the French review site that did a pump shootout sometime ago, I think you guys know which site I'm talking about....
There are a few good choices on the aquarium pumps I went research sometime ago which cost below RM100.

That MCT-5 really saves the day.... anyone buying some?

TJye...since I'm a freaking cheapskate, gonna stick to aquarium pumps and so far, the best compromise interms of heat Vs. flowrate perftormance has been the Nirox P2800 for me so gonna stick to that as since my head pressure loss WILL be nvery minimal.

has anyone tried the Titan WC kit?the one on bulk section..and does anyone knows where i can get the black ice extreme?

Probably I would stick to cheapo pump for the mean time
later if the GPU block is here then only I would order a pump along...

To those who bought stuff from din's bulk, he is having a COD on the weekend of 27th in KL....
I would personally go there and get the g4 from him....
anyone else is going there?

This post has been edited by TJye: Oct 20 2005, 04:44 PM

I'm there as he plans to COD at mid valley where I'm worjking part time for now

/me sniggers

guys..lets say i get a heater core off a car...and lets say i wana spray it to prevent corrosion and for asthetics...would the layer of spray affect its performance?and is it advisable?

Pornstar: I think it is ok to paint the heatcore, there have been a few ppl doing heatcore spray guides, even the watercooling guru , cathar,sparys his heatcore. I do not think there is a problem. I do read before about sparying heatcore on other forums and if I do not remember wrong, the verdict was that it will not affect the performance, or at least its effect is unnoticeable.
I would like to ask you where are you getting the heatcore of yours? in malaysia?

This post has been edited by TJye: Oct 21 2005, 02:17 PM

im planning to get one at a kereta potong shop..those imported cars dont need a heatercore in msia do they? well its either i get a heatercore or get a BIX..which i dono wher i can get...anyone here selling BIX?

TJye what happened to mthe heat exchanger project you were thinking of doing? amok got around so can ask him for help too. Hear those lil tubes of aluminium do help quite a bit

OPPPPPS................... The last time I went to talk to the lab asistant, he say he not sure need to check for me, then I forgot to go back and ask him
I got finals recently so....... I totally forgotten about it.
I will update you as soon as I go and ask from him.

Amok is coming to KL?