other voltages dont seems to do much for sandy overclocking......

Gv it some time bro Sandy is just out. I believe immature bios stil ruins OCing atm.
I can see from bios to bios it gets improvement in clocks vs voltage. Ram OC is terrible at higher frequencies but as said bios issue is the reason. Btw M4E supports 2400mhz ram in their bios settings but I still couldnt find the best settings to make it booted at 2400 at rated timings. Im using Patriot 2400c9.

my ud-4 llc still get vdroop ; ;
i got it to run at 5 gig though using 1.5v but it crashed like 5 hrs later not sure if i wanna go any higher in voltage....

Special guest has arrived,

A sneak preview,





Sorry for the poor picture. Will take another set again.

Update over the weekend.

Wahh bro is that Gskill 2133? Cant wait for the benchmark.

Is anyone getting their oc to prime95 stable?

After a long wait, received the memory from GSKILL. This is the new memory line up for new Intel Sandy Bridge. It's work excellent on the P67 board.

Let the number do the dancing.

Specification of Ripjaw-X,
DRAM Frequency - 2133Mhz
Timing - CL7-10-7-27
Capacity - 2X2GB
Voltage - 1.65V









Test System,
CPU - Intel I7 2600K
Motherboard - Asus P8P67PRO & Asrock P67 Extreme 4
Memory - GSKILL Ripjaw-X 2133Mhz
OS- Window 7 64









Thanks for viewing.

This post has been edited by louislkw: Jan 16 2011, 09:30 AM

U got nice dram dude. Look at the bandwidth.
and 5.5Ghz

Go and hoot GSKILL memory.

waiting for local distro bring in good models is like forever bro
going to order myself lah thanks!

nice ram wish they sell it here....... was looking for it too. finally got my 5 gig overclock to stable in p95 small fft temp is scary though 89 max lol

kevink82. Ur UD4 is not really bad bro.
Dun really need an expensive (overpriced) mobo for 5GHz.

not much choice here in miri, and m4e is just too much for me atm, asus boards atm looks to be clocking better though most forums got theirs hammering along 5 gig p95 with lower voltage....

that or my chip just blows..... 1.51v

Nice memory and benchmark.
How much you pay ?
Maybe Karom or lingloong will list them this month.
Btw,your Super Talent WX200UX6G7 are still under Karom V1?
My Hypers didn't play well with P67,time to change.

This post has been edited by stasio: Jan 16 2011, 03:35 PM

LOL that Elpida STT is in the list since long time ago but the bulk had never proceed. Sorry karom.
I dun think that model is still avail since it is declared as EOL by mfr.

LOL..i envy u guys on 2600k..me on 2500k for the time being only clock to 4ghz..1.14volt..afraid cuz still using stock cooling

2500K is not bad as well bro w/o HT u can go 5.0Ghz easier than 2600K due to less volt required and lower heat generated.
But to OC to the max u better grab Corsair H7O if custom wc is not within ur budget.

owhh..yup planning to get the H70 after this..but i'm gonna keep close tab to this thread since i still a noob in this stuff..

great to hear ur decision bro, later pls share us ur OC experience yeah
we also wanna see 2500K in action instead of 2600K dominating this thread

im using an i5 2500k , hd 5850 and psu 550w odin pro gigabyte psu unit..can i oc ka boss? please guide me massstaaa!!