Ohhhh, really?

OK, I have an idea now. Going to plug into my spare 250 ESC and motor to try .....

Mana ada? Not me lah .... I am a poor guy ..... talked about 550E since last year until now only got money to buy

No woh, maybe i just know him not too long.
But his m3d flight so entertaining loh ........

I found that in the servo menu. Anyhow I have reversed my throttle channel to get it working. After reversing now I get LOW stick -100% and HIGH stick +100% in servo menu. Also tested with my stand alone ESC & motor .....

---

Added on October 26, 2011, 10:34 pmYeap, I wish that I hav the luck to build it. This is a new model so it still has quite a lot of minor problem during assembly. Compare to 450 of course this 600 is much more easier to build. But there are some minor issue which you will not find in 450 Pro.



This post has been edited by daddoo: Oct 26 2011, 10:34 PM

Too much loctite lah
Now you can use a file/grinder to grind one flat groove. Just like those normal screw you use with flat head screw driver. Then apply heat and unscrew carefully.
But that screw u cant use again.

---

Added on October 27, 2011, 7:44 pmChanging tt gear? Crashed?

This post has been edited by daddoo: Oct 27 2011, 07:44 PM

True, try to hover at bigger field .... It helps a lot ........

ohhhhh ..... Qiw ..... that photographer likes to kacau me because I kacau him once before when benny was there .... hehehehe I am not that popular lah ....

Quite a lot flier there actually ......

Do you mean the photographer?

See .... that's the danger of sharing too much on internet
You can be easily tracked ....... hehehehhehe must avoid the cam in the future already ......

---

Added on November 1, 2011, 11:12 am
Did you see my 450 Pro flight? Hehehehe, still got shaking thumbs with that kind of flying Especially when someone is standing next to me and watching .....



This post has been edited by daddoo: Nov 1 2011, 11:12 AM

yeap ...... basically just some figure 8, flips & loops ......

Ya, want to ask you 1 question. How do you use your gyro menu in 8fg? I have reset those settings back to default and so far setup swash AFR (gosssshhhhh, it is swash mixing in 2801Pro) and Servo reversing only.

This 8fg has quite a lot of features and i am a bit lost now

This post has been edited by daddoo: Nov 1 2011, 01:58 PM

Hehehe, since I have bought the chicken (trex600) then might as well use better soya sauce (radio) to eat loh ...... no $$$ mai borrow loan shark

So you relate your gyro1, gyro2 and gyro3 to SWITCH #1, #2 & #3 respectively, right?

High ar? about 10m height because give myself some room to save the heli just in case something is going wrong ..... beginner mah

No lah .... that HARRIER is not mine, I am a poor guy lah .........
Later go home must understand the gyro menu already .....

Hehehehhe, if LHS has the V2 canopy would you change it as well?

Gossshhhhhh, this 8fg really freaking me out ......
Hehehe, the gyro menu has gyro remote gain for AIL & ELEV instead of RUDD only. Should I use it or inhibit it

Just got some info from helifreak. It looks like that 2 gyro gain are meant for futaba cgy750 fbl gyro only. The rest of the fbl gyro would not be working with the remote gain. So i think inhibit or turn on also no difference.

Hehehehe, the 600 is a FBL system, sorry to confuse you guys .... but using Align's one only lah .......
So I think I will still INH the AIL&ELEV gyro so that it would not kacau .......
A bit worry that the heli will tip over itself during spool up for the maiden ..... I have seen that a couple of times ......

This post has been edited by daddoo: Nov 3 2011, 10:07 AM

Sometimes even though the setup is right but still the heli could tip over due to vibration (upon spooling up) & the gain is too high ...... hopefully it is not going to happen to me

Ya .... the FBL gyro has exactly the same configurations for its rudder like the GP780. So this is just a piece of cake to me to setup the rudder ...... hohohohoho

Just watch the "CGY 750 Gyro Gain Set" in HeliFreak. The AIL-ELEV gyro gain use channel 9 & 10 (specifically assigned) on the receiver for S-Bus. So for 3GX FBL system you cannot have a remote gain from the radio I believe. Rudder is OK because you have a channel (CH5) connected to it.

Therefore you can only set the AIL-ELEV gain on the gyro since there are 2 pots there

Aiyo, hate to work with electronics that has no instructions .....

This post has been edited by daddoo: Nov 3 2011, 01:05 PM

Hehehehe, as you always say mah ... we live and learn

Different FBL system has different procedure to setup so I think we can discuss lah and help each other in this hobby .... kekekekkekeke

Hohoho, this week you won't be able to find me in the photo in that MRC thread kekekkekekek balik kampung ......

nope ........ PG kia is rich ... that's y I am not