I think those people in jln pasar will be able to replace your switch on the spot if it's not those non standard one.

---

Added on August 26, 2011, 8:14 amSame here, hide under the bateery tray ........
But for better cooling, put it at the side.

This post has been edited by daddoo: Aug 26 2011, 08:14 AM

I think at the side more safe then inside the frame especially near the motor unit (heat)....o ya...can I do the swshplt levelling before installing the tail yet??...

This post has been edited by cpmboy: Aug 26 2011, 10:06 AM

I see no connection between the tail and swash plate leveling, you can level your swash without the tail.

In fact the tail was the last last part that I have in the assembly usually.

the problem is not finding a replacement part for the trim switches (hopefully)
the problem is taking out the whole assembly to access the trim PCB/switch
if the trim PCB is easily accessed i might have already replaced it myself .. hhahahahahaaa

oppppssssss, I thought those Tx is just some simple assembly. But never dismantle a T8FG before ......

the PRO should be completed by now .. hehehe
few days no postings liau ... must be flying it already

Don't know leh ..... hopefully he is ...... and love his 450 pro because I love mine a lot

It's really a good trainer heli .......

PRO a trainer ??
that one everything oso can heli already lorr .. including hovering training la of coz .. hahahahaa

---

Added on August 28, 2011, 4:12 pmor maybe u love your BCP more ?? hahahahahaa

This post has been edited by QiW: Aug 28 2011, 04:12 PM

Now ah, BCP stepped down from my list already ... wakakakkakakakak

PRO is my taiko now lah ......... because i need to use it to learn 3D

Hi, does anyone know where to buy walkera 4G3 part in Klang Valley? i'm looking for 4g3 spindle shaft for my mcp-x.


Attached thumbnail(s)

i think i have a few of those ...
err ... u crashed ???

As far as I know, that spindle shaft is the same as the 4G6 one.
So for KL/Selangor, pls check with rcdreamz or hobbysportz. Hehehe, check with the price also.

This post has been edited by daddoo: Aug 29 2011, 10:03 AM

ya, crashed few times, the spindle shaft finally bent. your spindle shaft can sell it for me kar? the part no is: HM-4G3-Z-13

This post has been edited by kyoshooo: Aug 29 2011, 11:50 AM

can sell u one piece no problem ... that will be rm10 COD non negotiable
hobbysportz oso has it .. rm13 http://www.hobbysportz.com/helicopter-spar...aft-hm-4g3-z-13

Come with the 2 screw? Can where to COD? Puchong?
Hobbysportz no stock...

i will be at bkt jalil flying tomoro if u wanna come over .. its near SIRIM
or COD near len seng or BTHO cheras ...

what time you flying at SIRIM? i can meet you there...just give me the location.

ahoy there mates (bro QiW & Daddoo),
......
Well....sorry to dispntd u guys but my bird hvnt finish yet...I'm on a week long away from home at my mother in-law's house. I finished most of the build (main head, main body, tail sections)......hopefully after raya ..can finish off with the ccpm setup (half way), gyro + tail setup etc. ..........no worries, will share u its maiden flght.....

finally took my PRO out for a spin this morning ...
so long never fly it already but luckily its still behaving well .. hehehe
skills rusty but still intact ... no crashes

nice.... ......o ya... just wondering.....if one of my servos just almost 90 deg and i decided not to use my 6ex trim (want to save it later) and leave it that way and level the swash by adjusting the links.....is this ok??

This post has been edited by cpmboy: Aug 30 2011, 08:27 PM