Should have some opening ceremony. I.e. pilot please post your collection's photo ...... kekekkekekek

good good ... want to see ur pylon racer ....

Hehehehehe, preparing to invert
I am ah pek and very slow. Have some inverted flight training in sim but not progressing much. Plan to master in sim then only do that with real heli, I think crashing heli from inverted flight very hurt one, both to pilot and the heli .......

Then you should shoot a photo of Happy Family now ....

Hehehe, I was planned to add more family member next year but now has to cancel my plan due to a personal reason. I will not stop flying but I will reduce the time on rc, will be much much more slower and the slowest ah pek ......

I will second the words from the LHS owner ..... I will feel tire fast if I am too hardcore in it.

Why did you tie the landing skid of your 4G6S?

Hehehehehe, nice photo from you lah

This post has been edited by daddoo: Nov 19 2010, 03:40 PM

A reference here, http://www.flying-hobby.com/shop/fpv-super...tem-p-7451.html

well, video streaming is already expensive at the first place. Somehow this is a hobby grade video streaming then for sure it will not be cheap ...

But i think u can afford that ...

This post has been edited by daddoo: Nov 20 2010, 11:47 PM

After upgraded the stronger nose gear now my propeller tip is about an inch plus plus only above the ground. It was about 2 inches before mod so hopefully it will be OK later on.

I would love my 4G6 till die ....... so much fun to fly this little heli in a small park .... will wait till V120D02 price drop kow kow then will retire my lovely 4G6.

Walau, walkera released their 500 size heli already ... Flybarless too
http://www.walkera.com/en1/particular.jsp?pn=V500D01

But weird, 500 size heli using 315mm blade?????

Not just that loh, the battery also using 11.1v 1200maH ONLY!!!

If that motor really so efficient to use so little power for a 500 size heli, I would not consider and buy straight already .......

Anyhow the build quality looks good from the photo, just hope that it will be selling cheaper .... then later on when I can spend more time again I can have an extra option since the Rx is for 2801Pro Tx ......

---

Added on November 23, 2010, 1:23 pm

Qiw, have you tried to invert your 4G6S?

This post has been edited by daddoo: Nov 23 2010, 01:23 PM

Hehehehe, I have mood and place for me to invert my 4G6 but not ready to do so. A bit worry my tail will lari once inverted.

Hehehehhe, conservative people always like that one ..... or kiasu

No, I don't really love my heli but I just love my money ....... huahahhahahahah

the belt loose because the tail boom loosen up and slip into the tail boom block?

If that's the case there might be a super cheap solution. Some of them they will sand the boom's end to lock tight in the block but I found it not so effective and makes it more slippery. What I did last time was to put some transparent tape at the boom's end, the thickness you find out yourself but I only tape 1 piece around the tail boom.
Now I think you can lock the tail boom back to the block without the belt first. Then try to pull your tail boom out gently, if it works for you then you may put your belt back.
It is very hard to show you how I did but I think you will know once you started this mod.



*** Test properly and handle carefully so that you don't break anything ***



Hehehehe, I don't have this issue with me so probably I think it is not the heli's problem ..... maybe you should try to ask the previous owner if he knows anything about this

This post has been edited by daddoo: Nov 24 2010, 09:07 PM

Main gear? No .... unless I crashed and stripped it ........
You should learn to repair on your own now ... it's cheaper and more effective way to go.

Just stay at the spot where you feel comfortable that I would say. Perodua kancil is economical so you can't ask too much from it. Everyone also know that BMW's car is more comfortable but different people has different need.

Yeap and I usually order parts from Hong Kong, some of them is more cheaper even though you include the postage. Better service still ........

The distance of wave propogation is not only decide by frequency, it will be decide by its amplitude as well, for example if the volume is loud enough you can hear both high and low frequencies but of course this time the low one will be stronger.
So the conclusion is if your 5.8GHz system is very high power (which consume more energy, more battery), it will do the job as well.

Actually you don't need a lot of tools to dismantle the parts of BCP.
I use only 2 allen key sizes, 1 hex socket screw driver (to take out feathering shaft nuts), 1 cross head screw driver, plier and ball link plier. With this I can separate all the parts into single pieces.
Except the ball link plier is slightly expensive, the rest are very cheap to look for from hardware shop. If I remember correctly, these tools cost me less than a hundred.

Hehehehehe, I know you will not throw away your bcp and so do I. But if you really want to do so, let me know. Don't throw away, I am more than willing to pay for the postage and ship your rubbish to me

This post has been edited by daddoo: Nov 26 2010, 02:39 PM

try to look for this from hobby king, you will save $$$$
the only drawback is shipping time ....

you can make payment through paypal which is I am using now.

to apply a paypal account for online purchase it is FOC but you need to have a credit card or debit card.