*USE SSH FOR EASIER INSTALLATION

(Step 1) Install the following packages -





(Step 2) Create a directory for the neopwn setup files -





(Step 3) Copy get-it_files.tar.gz from your Pc/Mac to the setup folder by using OPENSSH or MASS STORAGE MODE



scp /files.tar.gz root@(Enter N900 IP):/home/user/MyDocs/neo

or

transfer directly using Mass Storage mode to the folder home/user/MyDocs/neo



(Step 4) Change to that directory







(Step 5) Extract the NeoPwn setup files







(Step 6) Copy the files to their required directories








(Step 7) Restart hildon-home



(Step 8) Setup the control panels User Interface




*STEP 9 AND 10 HAS TO BE DONE ON THE N900 TERMINAL*

(Step 9) Install the kernel drivers





(Step 10) Flash the N900





*this will install kernel-power..reboot afterwards


(Step 11) Unmount and Format your MicroSd ready NeoPwn files

Method 1 - using the whole micro SD for neopwn



Now Reboot

or

Method 2 - Using specific partition for neopwn

Use GParted to create and format the ext3 partition (eg: third partition of the microSD mmcblk1p3 - for .neopwn)



*NOTE AT THIS TIME, AFTER REBOOT, THE PHONE OR FILE MANAGER WILL DISPLAY AN ERROR "MEMORY CARD FORMAT UNSUPPORTED". THIS IS NORMAL. PLEASE PROCEED WITH THE STEPS.


(Step 12) Make a directory for MicroSd card to be mounted on to the partition




(Step 13) Mount the partition Microsd card on the /.neopwn directory



(type this if you formatted the card using "mke2fs -t ext3 /dev/mmcblk1p1)

or



(type this if you formatted the card using GParted and created an ext3 partition on partition 3-mmcblk1[p3])

*IMPORTANT - COPY THE FILES w00t.tar.gz FROM YOUR PC/LAPTOP TO THE DEFAULT DIRECTORY OF PHONE (/home/user/MyDocs) BY USING USB CONNECTION -> MASS STORAGE MODE

* THEN



*this will copy the w00t.tar.gz from the MyDocs to .neopwn..which will take quite some time (10-20minutes)

*FROM THIS STEP TO 17, COMMANDS ARE TO BE TYPED IN THE N900 TERMINAL ITSELF.

(Step 16) Change to the /.neopwn Directory




(Step 15) Extract the files



(it'll take at least 45 minutes to 1 hour to extract due to the large file. Make sure the phone is connected to the charger to avoid data corruption while extracting)

(Step 16) synchronize (Run twice just to make sure)




(Step 17) Give permission for neopwn to execute



*When done, do this (i prefer leafpad, but any editor is up to you - leafpad/vim) -

ONLY DO THIS IF YOU USE METHOD 2 IN STEP 11 (using GParted to create partition), if not, you may skip this step and continue to step 18



find and change the line that has "mmcblk1p1" to "mmcblk1pX" where X = neopwn partition, eg: mmcblk1p3 if neopwn is on partition 3. then save.

(step 18) To be able to use packet injection, download the modules here http://rapidshare.com/files/429066238/injection_modules.rar and add the enable/disable packet injection to the desktop by :

a)Enter through ssh and put the files "rmneo.desktop" and "insneo.desktop" (These are the shortcuts) in

b)Then put the icons stop.png and go.png in



c)Finally,put the "rmneomod.sh" and "insneomod.sh" injection script in the folder



d)Disconnect from the SSH


*FROM THIS STEP ONWARDS, COMMANDS ARE TYPED IN THE N900 TERMINAL ITSELF.

(Step 19) Give permission for the script to execute by




*exit the terminal

(Step 20) Add the shortcuts (Green Light, Stop Hand, and NeoPwn) to the desktops (*THIS STEP IS OPTIONAL)


(Step 21) Test if the packets injection is working and if the modules are being loaded correctly


a)tap the "Green Light" icon to turn on packet injection
b)type



to check the loaded modules

b)and now ur card has turned into monitor mode. To be sure, test like this :



c)it should say "Injection is working!"

(Step 22) Run NeoPwn V2 from the menu or desktop shortcut

***AFTER THIS,WHAT YOU DO WITH IT IS YOUR BUSINESS..AS I WOULD NOT CREATE A TUTORIAL IN HOW TO CRACK WEP USING NEOPWN AND GRIMWEPA..PLEASE SEARCH IT YOURSELF

(Step 23) After done cracking your target WEP, turn off packet injection to avoid high battery consumption by pressing the "Stop Hand" icon
* Check if the modules have been unloaded by

[[/B]