u can try DocKalpik or flash back to JG4

since u cant boot then can only use Odin, look for latest version of froyo in samfirmware.com

---

Added on November 9, 2010, 1:10 amaft aplyin, it boots into CWM, then select which options?
- yes. with backup and restore
- yes. with factory reset after backup
- yes. with factory reset without backup
- no. enter recovery mode
- no. remove the new config

chose the first one

This post has been edited by ken2291: Nov 9 2010, 01:13 AM

900+ should be without lagfix, coz when i flashed to doc's JPO, without lagfix was 900+ and after lagfix it became 1500+..

now my phone din hv firmware, if i wan to flash the firmware by using odin, wat the steps? i alrdy download the firmware i wanna flash.

yea, applyin it now. if wanna flash SpeedMod Froyo kernel-vI1.1 250hz jz direct install usin CWM no nid backup or do anythin rite??
EDIT: quadrant 1574

This post has been edited by ken2291: Nov 9 2010, 01:23 AM

just want to inform there are updates for the papago maps..

search malfreemap at google, please give support to the team

u cant go into download mode rite? hmm, no idea.. mayb others can help u. im new too

now i can in the download mode ad~!

EDIT: oh you can now, read post 2 in this topic, it will guide you, if got anything you dont understand tell us

at step 6:

6. Make sure you place all the firmware files(PDA,CSC,MODEM) and .pit files into Odin3
PDA = CODE
MODEM = PHONE
CSC = CSC

if the firmware you downloaded have only 1 files instead of 3 files (PDA,CSC,MODEM). just put the 1 file into PDA

This post has been edited by silentser: Nov 9 2010, 01:42 AM

erm... i should place the .pit file 513 or 803 n wan tick the re-partition or not? now i hv no firmware

---

Added on November 9, 2010, 1:46 amthe firmware i downloaded have only 1 file, now i dunno which .pit file i should place, >.<

This post has been edited by skk-john: Nov 9 2010, 01:46 AM

What you did?

i did nothing ==||| just try on again then can in to download mode ad, but cant on the phone normally, just can in download mode, recovery mode cant in.

---

Added on November 9, 2010, 1:53 amthe firmware i have downloaded from samfirmware.com, its show .pit is 803.pit. so i flash that using 803.pit? n i need to tick re-partition or not. no idea >.< im new in odin...

This post has been edited by skk-john: Nov 9 2010, 01:53 AM

Flash eclair first, much stable, then from there upgrade to Froyo. I suggest download JM5 since it contains CSC PDA and MODEM files.

No need re-partiation

JM5 is asia firmware? .pit file? 512.pit, 513.pit or 803.pit i should place??

what firmware did you download?

usually i just follow the samfirmware, if beside it say 803, just use 803. if side of it got a note, read the note below there.
some the firmware samfirmware will say to tick or not repartition, if it say nothing, you can just tick it or leave it as it is

This post has been edited by silentser: Nov 9 2010, 02:03 AM

Odin 1.7 released.
http://forum.xda-developers.com/showthread.php?t=832827

Seems it has fixed a semi bricked SGS

that guy right tho, 1.3 is the one that i always hear, 1.4 1.5 1.6 i never knew exist

If you mean sdcard as in the internal sdcard, then yes, you format you lose all but I am not sure what you mean by default vid and pics. I normally backup my internal sdcard to PC or the external sdcard before formatting the internal sdcard.

This post has been edited by kmrdeva: Nov 9 2010, 06:42 AM

How can i flash if my computer cant find the device
should i install kies?

This is what I did on my Win7 laptop (32bit).

1. Download drivers for Galaxy S from softpedia.com
2. Unzip the drivers to a folder
3. Plug in the phone (in download mode) to laptop
4. Set Windows to browse the folder and find drivers it needs
5. No problems with ODIN after this

http://drivers.softpedia.com/get/MOBILES/S...ndows-x86.shtml

http://drivers.softpedia.com/get/MOBILES/S...ndows-x64.shtml

If absolutely nothing is prompted or detected when you plug in the phone to the PC, then maybe you should try another USB port, or reboot the phone again.

This post has been edited by kmrdeva: Nov 9 2010, 07:29 AM