It was laced with layers of sarcasm la bro

I used them before but it was during the old athlon days, using stock it was ok but when oc i faced the dreaded screaming chokes problem

It was during the days where they were the only one left using the old open air choke like this:


Instead of ferrite chokes like these:


Donno bout current ECS motherboards tho, haven't touch them in a long time

Trust me the CM 90cfm performs worser than the Scythe 110cfm fan, the CM 90cfm doesn't even push 90cfm as it said, more like 6x IIANM

S-Flex is rated how many CFM eh? 6x? or 9x?

Owhhh ok nvm, just read somewhere S-Flex is rated 7x cfm, should be ok i think, don't wanna try fan like bro verdict ka?

This post has been edited by cloudwan: Dec 14 2010, 09:59 PM

That's the slim type right? Looks good to me, plus i think it won't eat that much of ur 1st ram slot space too

How thick is it bro? Standard 120mm fan thickness or its thinner by a few mm?

Tu dia, suda keluar dah secret weapon
Naise clock/volt there bro

Now u know the powah of a gud cooler + gud fans

Apa lagi bro, cari thermalright archon lah

Not sure bout being the best but just love how it doesn't interfere with the ram slots



Cooling efficiency also quite ok, comparable with the silver arrow



Full Review at X-Bits Labs

Not sure if its already reach m'sia yet Judging from the price IIANM its around USD79, reaching here should be around RM2xx

I believe u can decrease further more, 3.5ghz around 1.375v should be do'able

He's using Asus M4A88T-V mobo, even tho not 8+2phase like the TD-V should be ok around 1.375v

@Kabal
How about u give us ur full PC spec so we can be certain that its not hardware issues

Asus mobo's nowadays u have to play with its load line calibration, if u don't turn it on u will mostly won't get the stablest oc

How about tuning down the cpu volt a bit & upping a bit its cpu-nb volt, usually that will do the trick in cutting some volt needed to keep the cpu stable

I see, bro pm me what the best price u can get for the Scythe Ninja 3 & those 110cfm fans.. Maybe wanna try using those scythe fan with my karat noctua

If ur not using IGP i think u can just leave ht link speed at stock, asfaik only higher cpu-nb speed will give extra boost to cpu/memory performance

Belom kasi perah, berdarah pun x lagi, baru main2 skit2 only, but so far 17xxMhz at 24-7-8-7 1T 1.6v runs without a hitch, something i cannot do with my old Geil
Sabar yer, otromen koko mau perah lagi tapi ni x sempat2 mandi lagi

I think that opteron is just basically maybe a handpicked for enterprise usage of a Phenom II 925 or something, its still is a C2 revision of the chip..

Have u tried isolating the cause of the crash? Try keeping ur CPU-NB, HTLink & RAM speed as close to stock, see if the root prob is the cpu, u gonna have to test one by one..
It could also be the case of the mobo not being able to sustain high HT@FSB..

U sure bro? Where? That fan is the 110cfm right? Err got postage option??

Hahahaha so fast i post when read ur post i forgot to read the fan spec, malu shaye

This post has been edited by cloudwan: Dec 16 2010, 07:00 PM