Hi, which motherboard should I get if want to unlock a Semprin 140? Any cheapest. I know it is more towards luck to unlock. Does the Asus M88 USB3 works? It's website spec has a big unlock logo. Many thanks.

hi!

im new to oc.i try oc my 1055t to 3.4Ghz using auto setting for cpu voltage from bios..i dont know what is the suitable value for the cpu voltage. 
pls someone help me..
thx

thx bro!  hehehe... is it safe to use 4ghz in 24/7 usage with full load 57c?? 
Hahahaha gudluck bro!!! Knock em dead

Many thanks.
@cloudwan , i still here la, just not into overclocking since the demise of Duron. Sorry for the typo.

ASUS M4N68T-M V2 | N7025 | D3-RSVGL 190
^ if this one has 6 SATA port, this will be the best.

ASUS M4A88T-M/USB3 | A880G | D3-REVSGL 340
^ actually leading towards this model

The price different is like RM150, hmm, hmm.

LowYat don't have much AM3 board to offer

Any other recommendation? Considering my budget can span over below RM350. Many thanks in advance.

Thank you, I think I go with the GPU one. So Asus M4A88T-M/USB3 is the better deal right? Hmm, hmm.

Thermalright FTW..
me also used to get 30c on 1.25 vcore but while on 1.4v and above the idle is 40~42..
load 52c~55c..
Quite hot eh?..not even 4Ghz..
any scythe ninja 3 here?..

Okay, will try that on next boot.

vIMC is that "CPU-NB VID"? how much should i add? after added 8GB of eco im stuck on 3.7GHz, cant go higher cause unstable. 
previously was able to run at 3.9GHz and 3GHz NB without sweat when using Gskill ripjaw (this ram now fall into ah_khoo's hand already  )
im suspecting my ram's timing too thigh...

btw 3GHz NB clock need how to add how much NB voltage? its weird because previously can run 3GHz NB without bumping the nb volt

Im actually tried 1.3 but freeze when running prime95 blend, tried 1.35 was a no go either. going to try higher, previously 1.3v already stable enough 
Now the question is, whats the "NB voltage" for?

any body try gskill pi 1600 and patriot g series 1600 b4???need advise..

prime is prime 95 is it??

yalah bro...

i just bought adata xpg g series 2000g (2000mhz 9-9-9-24 1t 1.65v) does any1 ever oc this ram?? wonder how it perform 

aiyaaaa!!     nolah... my own money lah bro... got ppl pay my hutang hahaha
i use kingston valueram only huuuu.. still googling any info about the ram but to little about it

Ehem..ehem...item is ready...waiting for a right moment to ship it...

ehem2...   what item bro... :/hehe:  :/sweat:

something new... a gift from my beloved wife... 

cpu/nb freq = imc freq a.k.a nb freq to some
cpu over voltage = additional vcore from default volt
it's reaper 1600 cas7 bro... 1600 @ 6-6-6 still a no go, perhaps they're psc? bbse can't really do 1600 @ 6-7-6... 

nothing to post atm, so tired arrangin d cables in d new (2nd hand as usual) small case... 

Or else you wanna get a nice cooler? Ninja 3...

Ninja 3 good at load time which is priming...six core run at 4Ghz load is 57 max or could be lower...

You pandai la poisoning people.Luckily im not in the mood yet

lol. just bought this pc few week back only. poor already.

---

Added on December 19, 2010, 9:26 am

my oc ok or not?
will the temp high?
do i need oc bus speed / ht link?
this consider stable?

i dun think so bro, so far it behaves like psc... close to flare but not there yet... 

it's no longer a secret that i'm a pi/wprime idiot, so dun expect too much from me. so more, these benchies usually need tight timing capable ram which i dun have atm... 
new one i guess, d ram was replacement + top up from rmain a pair of ddr2. 

was bein lucky again this time, save me $50 from bein comrade of abg otromen. 
core unlocker enabled perhaps? 
easy bro, fast2 propose to ya missus can ledi... who knows u'll have more freebies than me... 

i'm no shaman/wizard/sorcerer/bomoh so expect no magik from me bro... but this is what i managed so far  

[attachmentid=1947158]

trusted tahap gaban seller! hahahaha... (ninja3 cun woooo)

4ghz dont utilize all core for daily usage unless u do a multimedia task... huhuhu

guys with thuban proc would like to know when u guys oced ur proc do u guys enable CnQ for 24/7 use

switching between task require cpu power alot..
especially like me switching between game.. browsing, downloading blah².. really need everything fast..

i tried before running 4 games at the same time switching with no prob (battlefield 2, modern warfare 2, dirt2 and dota) thats is real multi tasking lol 

GPU and alot alot or ram is it? currently tried cl 6-8-6-18-24 1t 1626mhz on my adata xpg.. priming  so long to wait 

ermmm doing it rite now boss 
iam using cheap xpg g series 2000g 

if using prime which torture test should i choose? 

lol... custom is d best, but if one insist on usin d predefined one, small fft for cpu, blend test for everything.

my preferred setting is:

cpu test > min @ 8, max @ 512, minute = 1
blend test > min @ 8, max @ 4096, minute = 1