PS3 (HDMI) --> TV - No problem

PS3 (optical) --> HT - only problem with GOW3 & Sports Championship..others no problem
will update later..thanks

found the solution for my problem..i have un-tick the DTS in XMB menu..now my GOW 3 and Sports Championship got sound using the HT..thanks to all 

you are welcome. looks like your HT does not support dts.

Receiver
Power Output
Total Power (PMPO) 3000W
Total Power (RMS) 330W
Front 55W x 2 (1kHz, 5ohms, 10% THD)
Centre 55W (1kHz, 5ohms, 10% THD)
Surround 55W x 2 (1kHz, 5ohms, 10% THD)
Subwoofer 55W (100Hz, 5ohms, 10% THD)
EQ (Flat/ Heavy/ Clear/ Soft) Yes (4 preset)
Subwoofer Level Yes
Center Focus Yes
Whisper-mode Surround Yes
Dolby Pro Logic II Yes
Super Surround Yes
Digital Synthesizer Tuner Yes
Station Presets 30-FM
Dolby Digital Decoder Yes
DTS Decoder Yes
VIERA Link*6 Yes (HDAVI Control 4)
Smart Setup Easy Setup

Network Troubleshooting

For Playstation® 3, to connect to the Internet (to enjoy the online capability), you can do it in two ways:

  1. Wired Connectivity (thru LAN).
  2. Wireless Connectivity (Wi-fi).

Please refer to your manual (with diagram shown) or visit the below site
http://www.zolved.com/synapse/view_content...rnet_connection

Q. How to test my ps3 connection to the Internet?
A. At XMB menu, select Settings > Network Settings > Settings and Connection Status List

You will see various tests will be conducted to ensure success/failure of those ps3 connection. If you have problems, please proceed to this thread
here and post the result for diagnostic purposes (so we can help users).

Some info on NAT types. (Technical)

NAT means Network address translation. NAT has various types here a are some examples.

How to find what NAT type you have.

If you want to know if you are open, moderate or strict. Go to the find game part of MW2 multi-player and look at the bottom of the screen, it will say NAT type then open, moderate or strict. If you want to see your NAT type number, then in your ps3 go to, Settings > Network settings > Settings and connections Status list.

NAT Type 1 is when you are connected directly to your modem with your ps3 by Ethernet cable. This is the best way to see if the problem is your equipment or a ISP or sever issue. So always try this first to see if it corrects your issue. If your problem is solved by a direct connection to your modem then the problem is somewhere with your router/ps3 settings or your equipment is starting to fail. If it does not correct the issue then you need to contact your ISP about the issue for help.

NAT Type 2 is when you are connected through a router into a modem. Now you can have three types of NAT type 2, open, moderate, strict. These are associated with router firewalls, ports and upnp settings. Best way to get open is to set your ps3 up with a static ip address in a DMZ in your router.

NAT Type 3 is port restricted. This means by default specific ports an options like chat, video, etc are disabled. This is usually associated with a combo DSL modem/router setups an/or your ISP is blocking the ports. If you have this setup, the guide may not be helpful to you. If so you need to contact your ISP for help or possibly buy your own modem and separate router, so you can have access to your own router admin settings, that a DSL combo modem/router usually prohibits you from having access to.

Note: If you have a ADSL/cable all in 1 wireless or combo modem/router. Just plugging in a ethernet cable does not have the same result as bypassing the router on a normal setup. Because your router and modem are one unit so there is no way to bypass the router part of the unit to achieve a NAT type 1 connection.

Open [NAT 1]
The best experience, you can play/talk with all other gamers.

Moderate [NAT 2]
Better, but not ideal. You can play/talk to other gamers that have a NAT Status of Open and Moderate and no-one else.

Strict [NAT3]
This is the worst possible setup. You can play/talk to other gamers that have a NAT Status of Open and no-one else.

Q) I need some help with the ps3 internet settings (port forwarding, NAT & DMZ settings). Help?
A) Here's a good guide, here and here
Try setting the MTU setting to 1364 on both the router and the PS3. A few have reported more stable connections at MTU 1364.

Recently PSN connection have been unstable on streamyx, its advisable to set MTU 1486 in ps3 network settings. - knuta

Q) What router should I get for PSN?
A) Join the discussion about routers here

Ssup fellas,

How do i change my smiley psn avatar?

Hi guys, have a question. Hope can get some useful feedback from you guys.

Can I swap between 2 hdd for 1 ps3?

For example, my friend and I share a ps3, so he has his own hdd and I have my own hdd. So when he plays he swap his hdd in and then all his games saves and account and dlc or whatever it is will be there. And when i get the ps3 and plug in my HDD, then all my contents will be there. Is that possible?

Or will the ps3 ask to format my hdd when we swap another new hdd in and put back the one that was there before?

account management (must log in to psn first) on ur xmb menu...there is an avatar function over there...when u found it, walaaaa!! a bunch of new smileys

Yes, you can swap between 2 hdd without format.

If you swap to other PS3, then it require format.

helllo guys..
i have  question and curious.. why my ps3 console suddenly tune in normal mode,means display not HD. i used bravia model BX400(fullHD)  .. i dun know why it become like that, only when i start to play today ...yesterday and before that it was normal. i'm a bit confuse now. bcos i try to change the hdmi cable and it seems not HD  . i used cap ayam hdmi cable only .
i've try the setting display or do i need to buy new cable?

An improper shutdown, which prompted a default reset to the display settings.
Just set it back to 1080p under Display Settings then.

what settings do you suggest?
just tick on the 1080p or all ? 720p,1080i n 1080p?
which do you recommend?
and er,do you guys suggest putting a cloth over the Ps3?to prevent dirt and dust,
cause my ps3 is white and it's easy to notice dirt and dust ontop of it

just tick all..it's support to set the max our display (monitor / tv) can support

that's why i change my mind from white to black..putting a cloth should be no problem but pls make sure u don't cover the ventilation hole. or maybe u can get a clear skin for u'r PS3

no, don't tick all. remember what happened to your HT when you tick all

just tick all..it's support to set the max our display (monitor / tv) can support

that's why i change my mind from white to black..putting a cloth should be no problem but pls make sure u don't cover the ventilation hole. or maybe u can get a clear skin for u'r PS3