good job acther, btw u should do LinX 20 runs to qualify for XS 4.5GHz club
dont forget to take SS during LinX loading. gambateh!

oh my 2k cl6 with 990x >.<"
this proc is better compared to SB right ?

Not satisfy with the clocks yet, wanted at least 4.8

>.<"
what's the clock ppl been reaching with this 990x ? on WC .

awesome clocks dude

can count the no of ppl with my fingers in the world running 2k C6 uncore 4k on a x58.

---

Added on March 12, 2011, 8:35 amu too

This post has been edited by cstkl1: Mar 12 2011, 08:35 AM

eh...just got my hands on E760,nb/sb quite hot....55c lol
need to buy new mobo wb to cool down the temp...

This post has been edited by selfdz87: Mar 12 2011, 11:47 AM

as i see in ur sig, y u use dual channel for ur X58 system??

coz ram price for triple channel is ridiculously expensive bro....no moneh...huhu,
cheap dual channel ram is enough for me right now...

btw not using that ram anymore n lazy to update the sig....hehe

This post has been edited by selfdz87: Mar 12 2011, 11:55 AM

Kalvin: without ur lil secret I'll still be stuck at uncore 3000 lol

not really secret. more like evga fault.

r3e auto is correct..

@cstkl1 or owikh
izit safe to set 1.45v vtt on E760 without mobo wb??

This post has been edited by selfdz87: Mar 12 2011, 07:01 PM

should be fine
as referred to the 1st page for Classy, actually all the way up to 4.6GHz was using stock cooling/heatsink (non wb).
the highest 1.525v load temp for vreg during LinX was less than 80C.
stock vreg/vrm/pwm heatsink on Classy is working efficiently

oh...sure bro?coz now the temp is like 55c now...
will try my luck on 4k uncore wif this classy....hope to get it stable....
btw thanks 4 ur explanation bro...

4k uncore is only 1.4v .
anyway, im running mine at 4.2ghz 21x200 2k cl8 PSC chipset
vCore damn high 1.4v <--- not optimize yet cause trying to find get the stability first .
vTT 1.45<--- also very high for 4k uncore
vDimm 1.65<--- seems like now only can stabilize the linX .
before this try lower voltage problem .
will optimize again .

anyway, 62gFlops on 4.2ghz HT off 2k cl8 triple channel = good or slightly low ?

and what's d scale on the PSC chipset ram ?
i want to know the voltage scaling for 2k c8, 2.1k c8

Good luck with ur 4k uncore.
Golden 920 + Classy + DomGT 2000 + google make things easier for me.

i7 975 @ 4.5Ghz HT OFF
EVGA Classfied E760 Bios 77
Corsair CMGTX3 @ 2150Mhz 8-10-9-24-1T, RTL 60/62/64



most of the time it will bsod on the 12-14th pass lowering the pll, vtt, vcore slightly didn't help either.

is 100 run linx enough for daily usage ?

wanna ask which 1 is the best for overclocking or high spec socet?

1366 1156 and got new 1155 rite?

the new 1155 is better in terms of performance .
better overclocking ability as well .
paired up with superb custom WC and will get best out of it ^^,

erk, 1.425v for 4.4ghz ht off still fail >.<"
still thinking whether to go further or not .

btw, lowering vtt resulting in lower gFlops .
what does it mean ?

scale of 4.2ghz at 2k ram should be around 62gFlops right ?
after lowering vtt, i get 59gFlops only .
what does it mean actually ?