any nf7 user try the vdimm bios trick successfully?

Zahri, which bios r u in? CPC off or CPC on? 1.8 or 1.85 ? wahhh.... need good cooling / water there dude. max i co wif this 1.75v. try increasing the VDimm. 2.8v - 2.9v... i say, still safe for vdimm. n one more thing, monitor ur +12v n +3.3v. these rails should be in range +-5%. If lower, then need a good PSU. If its fluctuate so much (more than 0.1v), need fluctuation mod there. ask collinwong for this mod.

What Vdimm BIOS mod?

no need to fear the temp,,,,, the max is 80!,,,,if u do 70 it is just fine.

BTW: the PSU fluctuation is crap! well im running my rig in rm 45 450w PSU.... and the

+12 = 11.80

3.33 = 3.22

and can oc sky high no prob at all,,,,

what is "fluctuation mod",,,explain please!

BTW: full system spec is at my siggy!

Fluctuation mod? minimized the fluctuates lorr..... collinwong "teach" me dis.

mr_47,

thanks for the tip, will go home and do that !! increase to 1.8v or 1.85

using a ThermalTake GOLF 325 COmbo Heatsink

might change to SLK900A.

satanhead2003,



i did not flash my bios yet, i'm still on the original Abit bios..

CPC not sure....
my vdimm is 2.6v i think...
rite now on Kingmax DDR's 256mb x 2, not sure wether can OC. some say CAN !!

The Vcore fluctuate mod was found by Tictac and another popular forumer in Tictac's website before.

i wont bet a high oc wif official bios,tho. in my exp, highest oc on official bios is around 215-220. after using modded bios, wif some burning n tweaking, able to do 260 wif 2.5-2-2-11.

erm... 215 - 220 fsb... , rams ? 1 gb ?

yup 1G. double sided. thats y i use 2T.

fluctuation mod is a mod that basicly made the vcore STABLE .... it shorten da fluctuation range .... thus maintaining stable vcore to ur processor ....

ok RM 45 psu .... it's sure doing fine .... but .... once it blows.... bye bye to ur rig this is for real... last time i dun believe it ... until my fren's mobo fried... graphic card kong etc becoz of psu failure sudden during oc

yup, this is true. my icute blow oso. lucky me, onli the +12v rails. got burn on the mobo +12v ATX connector. Lucky my mobo survived.

show me how to do Fluctuation mod!

BTW: using the psu for 5 years already!



This post has been edited by Mr_47: Feb 9 2006, 05:31 PM

cool....

hehehe.... 5 years ehh !!

i have changed to a few PSU in 5 years
hehe

http://www.xtremesystems.org/forums/showthread.php?t=35875

i manage to get 2.93vdimm when i set 2.6v in bios at first. but once i change the vdimm again, the trick is unsuccesful.

omg solarmax.... i aso owned this psu .... da rails are strong ... but very very light only da weight den i scare..... changed to enlight btw... i dun think da psu is 450w....

its cool anyway!

stable like a BMW,,,,,,,,, maybe im lucky!

hehe...

maybe shud experiment on i cute psu's

what do u think of the Icute Twin Fan ??

the blue color one...

hehe....

any comments on that PSU ?

i used to have those twin fan 450w. after 6 month, burned on +12v. lucky my mobo survived. after dat, i dun dare to "touch" another icute.

woah....

really ahh they burn ??

i'm thinking of getting that... hehe....

try those chapalang one's first..... if they survive like mr_47's then use until they are able too...

hehe...

currently i have the
CM 450-aclx RM 245
Powerlogic Atrix 500 RM 199

herm..... any comments on the above PSU ?