Sounds right. I get 65C during full load on my proc.

I thought upping the Vagp to increase stability only works for the P4 chipsets? I tried upping the voltage before, but I don't get any increase in stability or overclocking.

Actually, i'm referring to Radeon problem..

not likely, i'm using redlines and 2.9V is not an issue.

i see, i will try it out, but i seems weired doesnt passing memtest means that the configuration is stable? Furthermore, i'm using 2T and imho 220mhz on 2-2-2-11 is not quite a big push.

why agp?

in this case, i'm doing fine then..

but i'm only running at 1.866 ghz at 128 DDr.

This is y....

doesnt quite make sense,
it's the memory i believe that cause the problem as there are indication in the war3 error log
200 mhz it runs fine and 220 mhz it crashes doesnt sound like a video problem to me

me oso got prob like this, w/o gfx oc'ed, but proc oc to the max. increasing the vagp, solve it. sometimes, it can be the video driver. that's y i changed to modded driver, dhzeropoints or ngo is best for me.

well i'm using xtreme-g
will give it a shot though

erm....

anyone know what causes this problem ?

when my windows xp screen is loading.... a two tone siren cud be heard...

sometimes it just shuts down.....

but sometimes u can go into windows...

the moment abit EQ loads.... it shuts up....

whats the problem ehh ??

i'm blur down to earth already.....

dude please set the low and high voltage limit in your abit EQ!

solved!

ok...

thanks....


i thought so there might be something fishy with that abit eq...



anyways,

i'll go home and try it....

so how its going??

all fine dude???

i think i know my problem now !!

from the manual it seems the mobo needs a 350 watt power supply for a heavily loaded pc...

i'm running 300 watts... so thats why it beeps.... i think....

and sometimes the screen flicker, maybe its due to the lack of power...

now have to search for a new PSU....

any reccomendation...

some say enermax, some say CM but i also dunno... hehe.....

ohh...

installed new Rams yesterday...

256 x 2 - Kingmax with kingmax chipsets.... any comments ?

erm i installed it to the 3rd and 2nd slot ?

shud i change it ?

monitor flicker doesnt has anything to do with power supply..300W psu is just enuff..JUST enuff,but not recommended tho.yeah get a new one.look around based on your budget

yeap sometime abit board will beep for hunger of more power....

btw: both brand is just fine,,,, go for it.

install ram from slot 3 then 2 then 1

so in your situation ,,,it is just fine,,,,

dual mode!

ok thanks....







Is there anything wrong with the above monitoring ??

the beep is anoying though

thinking of going for the

CoolerMaster 450w Realpower Black color... around Rm 245- 255 ?

what do u think ?

This post has been edited by zahri: Feb 8 2006, 04:43 PM

arghh....

cud not get the KVR with d43 chips in jb...

so hard !!

man try set the vcore to 1.8 or 1.85 in bios!