Outline ·
[ Standard ] ·
Linear+
NF7/NF7-S Rev2.0 Modded Bios, : Discussions and Results :)
|
gsan
|
 Dec 13 2006, 08:51 PM
|
|
QUOTE(GKWong @ Dec 11 2006, 07:14 PM) wow...interesting....nvr get until tis extreme situation b4.... anyway...issit putting ramsink on it will be better? aluminium or copper? i read from others that aluminuim is good for passive cooling and copper is for active cooling. any cooler will do as long as not to make the SB too hot. This post has been edited by gsan: Dec 13 2006, 08:52 PM Attached thumbnail(s)
|
|
|
|
|
|
GKWong
|
Dec 14 2006, 12:28 AM
|
|
|
QUOTE(gsan @ Dec 13 2006, 08:51 PM) any cooler will do as long as not to make the SB too hot. hmm...nice heatsink. lol can see the nForce logo after placing a heatsink....i like the label at the chip... hehe  muz sacrifice to get better stability. btw...is tat ur board? issit a Thermalright SI-97 at the proc or wut?? |
|
|
|
|
|
gsan
|
Dec 14 2006, 10:03 AM
|
|
|
QUOTE(GKWong @ Dec 14 2006, 12:28 AM) hmm...nice heatsink. lol can see the nForce logo after placing a heatsink....i like the label at the chip... hehe muz sacrifice to get better stability. btw...is tat ur board? issit a Thermalright SI-97 at the proc or wut?? ya, that's my NF7-S before, but now goes to another people u r right, the heatsink is Thermalright SI-97 which also sold to people  |
|
|
|
|
|
GKWong
|
Dec 14 2006, 07:54 PM
|
|
|
QUOTE(gsan @ Dec 14 2006, 10:03 AM) ya, that's my NF7-S before, but now goes to another people u r right, the heatsink is Thermalright SI-97 which also sold to people aiya.....u ah....sigh...  i wan that SI-97....  btw...issit SI-97 or SI-97A? |
|
|
|
|
|
gsan
|
Dec 16 2006, 12:35 PM
|
|
|
QUOTE(GKWong @ Dec 14 2006, 07:54 PM) aiya.....u ah....sigh... i wan that SI-97.... btw...issit SI-97 or SI-97A? SI-97 and SI-97A are both same. Just SI-97A come with bracket for s939 socket. |
|
|
|
|
|
lazzy_dogg
|
Dec 18 2006, 06:49 PM
|
|
|
anyone can help me out here? i cant even boot my nf7.... can someone help me hard flash my bios?
|
|
|
|
|
|
Kuso
|
Dec 20 2006, 10:55 AM
|
New Member
|
i m nf7-s rev2.0 user, anyone can help me here ?
previously i was using 2 x 256mb ddr333, so my setting was clockspeed 166mhz x 12.5 which was 2.09ghz, then ytd i change my ram to 1gb ddr400, y i unable to run at 200mhz x 10 >"<... anyone can help ?
|
|
|
|
|
|
coolblade
|
Dec 20 2006, 11:15 AM
|
Getting Started
|
QUOTE(Kuso @ Dec 20 2006, 10:55 AM) i m nf7-s rev2.0 user, anyone can help me here ? previously i was using 2 x 256mb ddr333, so my setting was clockspeed 166mhz x 12.5 which was 2.09ghz, then ytd i change my ram to 1gb ddr400, y i unable to run at 200mhz x 10 >"<... anyone can help ? Mind to provide us your cpu's OPN? and what is the codename of your CPU (eg: Palomino, Thoroughbred or Barton)? IIANM, I think your CPU is multiplier locked. |
|
|
|
|
|
Kuso
|
Dec 20 2006, 11:33 AM
|
New Member
|
QUOTE(coolblade @ Dec 20 2006, 11:15 AM) Mind to provide us your cpu's OPN? and what is the codename of your CPU (eg: Palomino, Thoroughbred or Barton)? IIANM, I think your CPU is multiplier locked. is atlonxp should be Thoroughbred.. multiplier unlocked... |
|
|
|
|
|
GKWong
|
Dec 20 2006, 04:59 PM
|
|
|
any CPU-Z screenshot? what is the symptom when u set the multiplier to and fsb to 200x10? cant boot or remain same?
try to set ur fsb at default and change only the multiplier.
|
|
|
|
|
|
Kuso
|
Dec 20 2006, 05:18 PM
|
New Member
|
cant boot lo...
166mhz x 12.5 can boot = 2.09ghz
200mhz x 10 cannot boot = 2.00ghz
i jus change my ram to 1gb ddr400, last time was using ddr333, (166 x12.5 is last time setting)
|
|
|
|
|
|
arafat
|
Dec 20 2006, 07:08 PM
|
|
|
maybe because ur multiplier can be overclock only,not downclock..
have u try 200 x 12.5? or 200 x 11?
|
|
|
|
|
|
coolblade
|
Dec 21 2006, 07:27 AM
|
Getting Started
|
QUOTE(GKWong @ Dec 20 2006, 04:59 PM) any CPU-Z screenshot? what is the symptom when u set the multiplier to and fsb to 200x10? cant boot or remain same? try to set ur fsb at default and change only the multiplier. I seconded GKWong. Kuso, if u able to provide us your screenshot of CPU-Z, that would be informative for us to see clearly what happened to your setup. We'll try to rectify this matter. |
|
|
|
|
|
arafat
|
Dec 21 2006, 10:28 PM
|
|
|
QUOTE(coolblade @ Dec 21 2006, 07:27 AM) I seconded GKWong. Kuso, if u able to provide us your screenshot of CPU-Z, that would be informative for us to see clearly what happened to your setup. We'll try to rectify this matter. he cannot even boot using the 1gb ram.. what information do u want to know from cpu-z? |
|
|
|
|
|
gsan
|
Dec 21 2006, 11:55 PM
|
|
|
QUOTE(Kuso @ Dec 20 2006, 10:55 AM) i m nf7-s rev2.0 user, anyone can help me here ? previously i was using 2 x 256mb ddr333, so my setting was clockspeed 166mhz x 12.5 which was 2.09ghz, then ytd i change my ram to 1gb ddr400, y i unable to run at 200mhz x 10 >"<... anyone can help ? try flash bios to D26 Mantarays XT and then give a try to 10x again. |
|
|
|
|
|
GKWong
|
Dec 22 2006, 12:15 AM
|
|
|
or u might try at fsb 166x10.5 or 166x11 or 166x13 . try at original fsb but different multiplier.
best is to flash to D26 Mantaray XT bios like wut gsan said...
|
|
|
|
|
|
Kuso
|
Dec 22 2006, 10:56 AM
|
New Member
|
where can i dl the D26 Mantaray XT bios ? anyone can send me ?
or can i google it ?
now i stil running 12.5 x 166mhz wit my 1gbddr400...
coz i waiting for new power supply and VGA card...
after tht i will try again and ask for help >"<
|
|
|
|
|
|
Kuso
|
Dec 22 2006, 03:42 PM
|
New Member
|
i have found it how.. but i found 2 version..
D26-MantaRays-XT
D26-MantaRays-XT-CPC
which one to use ? >"<
|
|
|
|
|
|
gsan
|
Dec 22 2006, 06:48 PM
|
|
|
QUOTE(Kuso @ Dec 22 2006, 03:42 PM) i have found it how.. but i found 2 version.. D26-MantaRays-XT D26-MantaRays-XT-CPC which one to use ? >"< D26-MantaRays-XT-CPC = CPC off a.k.a 2T |
|
|
|
|
|
coolblade
|
Dec 22 2006, 07:21 PM
|
Getting Started
|
@Kuso
D26-MantaRays-XT - suitable for RAM stick with one side attached with chips
D26-MantaRays-XT-CPC - suitable for RAM stick with two side (both) attached with chips
|
|
|
|
|
Quote
0.0268sec
0.21
6 queries
GZIP Disabled