ahaha alamak terlepas tgk..

ingatkan case cosmos tadi.. terkejut aku boleh fit 480 rad ngan 240 dalam tu

Updated the temps already^^

Could be abit lower...
Hot air from the 240 are blown into the 480 : (

With the help of 3 very wonderful people, I have finally managed to finish my build.
Thank you vladtheimpaler, ezzydamvp and Jibek, you guys have made this possible

So here are some pics of my updated rig



and I also managed to change the stock RV02 Blue LED to Red to better match my whole theme



This post has been edited by rzs77: Aug 3 2010, 12:42 AM

hii, im new here and this is my 1st time trying wc,

please teach me

here my wc- gigabyte 3d galaxy (bought second hand cheap), casing also cheapo one- cm elite 430





rig - phenomx4 9550 2.2ghz
idle temp - 34 celcius
after 24 hour stress test maximum temp 41celcius


problem i see here -
tube behind too long, will cut later
water in tube not full, got air space. dont know how to make it completely fill tube
rad need put at top because if put behind, graphic slot got covered, cant close side panel
uv and other bling2 wil buy later

nice rzs77...
the power of dslr..

Thanks.

nice, i had that kit for like a month. then went for custom watercooling

by the way, aluminium + copper not a nice combination. you'll get cloudy tubes in a week.

mmg style lah
adik nk jadi GF abg haris leh??

mmm, you mean the waterblock is copper and rad is aluminium?
so need to change waterblock or rad something like that?

@rzs77..
nice setup la bro...

btul la mat haris nye rig mmg dah takde ular batang pinang dah...da tuka jd ular lidi wo.
nice setup mate...its ur idea n we just help to make it happen. kipidap

Change rad, it's alu. The block is actually pretty good. Most rad sold here are copper. Can get from the respective seller here

@rzs77

the 4th pic is beautiful bro, u should put that up as your desktop wallpaper

=.="

Sy suke perempuan shj

Hahahaha! Thanks! Kalau kau x tegor, sampai tahun depan ular lg

Ular lidi pon boleh! LOL! Thanks. Korang byk membantu

I never really thought about it but now that u have mentioned it, it really IS beautiful huh? Thanks for the heads up, will do that!

nice 1 rzs77!!!

those ppl @ SS sure knows how to make good casings!!!

Thank you. Yeah, they sure do. after using silverstone, it's hard to like any other caings

My next upgrade will most probably be another Silverstone

btw, ur set up is not bad either. by not bad i mean AWESOME

Actually this is a bit waste of time
Jump straight to a proper loop will be my choice
PM vlad or clawhammer for more info

aha even if's waste of time also.. he's getting pretty good temps.. 41C load.. :S

altho a complete custom liquid cooling would look sooo much better.. u might need to fork out a huge amount of $$ for it

rzs77

Bro... for your tubing not being to be completely full, here's a tip that I use.
Very basic is to understand the physics of air/ water/ gravity, this is especially helpful when you wanted to drain your tubes in the future.

So, from the looks of it, if you can try to mount your reservoir higher, you will be able to fill up the tubes... what's happening now (I THINK) is because your radiator too very high up vs. your reservoir and inlet is coming from top. To see if my theory make sense, try tilting you casing sideways and see how the tube fills up itself...

As for your rad, you can mount it outside of your exhaust fan and check how much temp is affected... I expect not too much, and will make your overall loop much cleaner.

just my two cents

---

Added on August 3, 2010, 10:30 pmOooh.. you're too kind rzs77

My next build will definately be a silverstone.. FTW man!!!

This post has been edited by kencjl: Aug 3 2010, 10:30 PM