even with latest bios also start from 1.6v?

hi to every body..i like oc..nw using d 1055t and using c3f,currently oc to 4.1ghz..trying to oc 4.2..but nt to stable la..got solution?

just want to know what mobo u use now?

He said it already C3F = Crosshair 3 Formula

Hehe..mayb 4.2 is d most higher d..haha..can boot up,bt run prime 95 can stay arn 20 minute..then blue screen.

Ur running on air cooling right? I believe 4.1ghz is the highest u can reach on air cooling right now
If u wanna go higher need to go WC or LN2 i think

Yup..wc..haha..i thk wan to do it until 4.5 le..haha..nw trying best setting for 4.2

Whats the voltages did u use?

ram setting too?

Enable extreme ov and loadline calibration,d cpu volt is 1.58v,cpu nb is 1.35,vdda is 2.71,ram is 1.7

---

Added on August 6, 2010, 1:42 pmI try 7-7-7-18 and auto also same..i use ocz platinum.

This post has been edited by alan kc: Aug 6 2010, 01:42 PM

ocz platinum DDR3 1333 7-7-7-20 1.65v?
are you sure want to put cpu voltage to 1.58v?

1.58V is very high indeed for AMD
You using water cooling kit?

a ss + full specs on critical components will definitely help ppl to help u better. other voltages + temps are important too especially high clocks are involved.

Yup..last time i use 955be i push it 1.75 to oc 4.0..hehe..but my core temp maintain 55 degre..ocz platinum is 1.5v..bcoz now i auto d setting is running 6-6-6,so i need to up ram volt to 1.7 for stable it.

---

Added on August 6, 2010, 2:53 pmYup,i use custom made wc..

This post has been edited by alan kc: Aug 6 2010, 02:53 PM

Mind give us CPU-Z SS?

It would be easier for us

And also a temperature

Nw i using phond cant upload pic..my core temp is 55 to 59 when prime 95 running..bus is 310..multiplier is 14..

tighter timing is always better but at initial stage it's better to loosen 'em a 'lil while ur explorin d max capable freq (be it ram/chip). i'd say cas7 still decent for amd setup... 8 is ok while 9 is abit lax to my likin... but then, that's just me... diff ppl diff taste...

Haha..i hav test all d setting cl 7,8,9..all same..blue screen.

How about looser timing like 10? Hmmm

my stable oc. this one without upping any voltage and not change ram timing yet.
i use 4 ram stick, 2 ddr2-400 and 2 ddr2-333 got effect to oc or not?