m4a785td-v evo look nice, but dont support phenom 1, need ddr3 ram.

haha...change 1055t lo..haha

Attached thumbnail(s)

How come CPUZ Shows 1.4V while HW shows 1.71V - -?

But overall looks okay to me..

But i think lower voltage should be able since Deneb loves cool

vin1 could be vdimm though

that HW is not vcore..its vin1.and with my giga, vin1 is the vdimm..
with this biostar..its vSB..

so most probably this vin1 is vdimm..
and thuban TS..not deneb..still both loves cool

but when i lower it 1.5v..after boot up a few minute,havent run d prime 95 already get d blue screen d..

u mean you lower from 1.7v to 1.5v?

could mean that your ram OC not stable?

woo, 4.2ghz stable on 1.387v.

wrong readings at cpu-z he already mentioned he is using 1.58volts

okok, notice it.
looks like thuban core is also a good stuff for overclock.

yup..i cant stable if ram volt use 1.5v..cpu also 1.5v cant stable..

---

Added on August 7, 2010, 12:42 amyaya...i also cant believe can go until 4.15

This post has been edited by alan kc: Aug 7 2010, 12:42 AM

if u use LNC, u can hit 4GHz with only 1.35 volt, FACT!

haha...last time my 955 also hit 4.05ghz by using wc..

Urmmm....you using latest hardware from my view...than OC more lo...

This post has been edited by verdict: Aug 7 2010, 01:23 AM

but now mine 1055t frm 2.8ghz go until 4.15ghz is more good..hehe

Ya lor, ur on WC being able to push it up to 4.1ghz already is a good thing in my book..
In my case, being able to push my 2.8ghz cpu to 3.8ghz on aircooling primestable also is a quite feat for me, 1ghz oc tuh

but i use air cooling to push it 3.9ghz..haha

Owhhhh, i see, what HSF did u use for 3.9ghz bro?
I tried 3.9ghz & 4ghz b4 but i think my rams & HSF are holding me back, kept reporting core 1 fail or something2

haha..that is ur cpu volt not enough

---

Added on August 7, 2010, 2:47 ami use v8 and prolimatech b4...try to 3.9ghz...use cpu volt 1.7v

This post has been edited by alan kc: Aug 7 2010, 02:47 AM