those are what i read..i also never try those tweak..so im not that "class"..kekeke

better watch out with ur vcore sir..
last time i only unlock 3cores of 555BE.. and the vcore stays below 1.4v.. but once i touch the mosfets while priming, i decided not to prime anymore (eventho before that i prime several time)
i donno how high the mosfets able to withstand heat, but at that time, it was very hot ( i confirmed it several times).. i donno its me or the mobo..but the mobo is exactly as ur's..

and ur KVR is what chip eh?

This post has been edited by kuntawakaw: Oct 13 2010, 02:54 PM

Ensure that the PWM has proper cooling unless you want it send to Distri

Do take note that Heat also plays big factor in AMD processor..

How about setting ur vcore at 1.37~1.38v & cpu-nb volt to 1.2v

i am confused with setting up the cpu-nb volt to 1.2v, just now screwed everything revert all to stock and tried again, now getting this


with vcore 1.45v which now fluctuating between 1.2+/- volts to 1.3 +/- volts, ram volt 1.65v with multplier fluctuating in between x4, x11, and x14

This post has been edited by eternity4av: Oct 13 2010, 04:07 PM

cpu & cpu-nb llc are enabled or disabled?

@ bro cloudwan:

where have u been lately bro? miss all ya spam ledi...

This post has been edited by ah_khoo: Oct 13 2010, 04:03 PM

do you mean the loadline calibration in bios? it's on auto.

I'm using this stock fan that I bought separately from my 555 be. Not bad so far.

try cpu = enable, cpu-nb = disable. it works for my fren's m4a88td-v evo.

cpu llc very good id say.. compared to other mobo that dont have it

but for cpu-nb..abit tricky.. it can be better or worse.. kekeke

i wonder why alot of ppl using this mobo eh? m4a77td? is this because of the HW Q&A crap recommendation?

This post has been edited by kuntawakaw: Oct 13 2010, 04:19 PM

yeah, so regret now. i think i just leave it with the current setting 3.4ghz. is it ok? can 24/7 for that?

Fuuh..Everyone on 6 core already

i'm using the same mobo too. So far so good. you should try prime it for stability. I leave it from morning to afternoon. nice.

what's your clock speed?

3.5ghz. Stock cooler. But in the que to get the 3rd party.

have u tried touching the mosfets?

@XiuKeong
now its ur turn.. go buy now.. i recommend 1090t..it will suits u well..kekeke

yeah, i manage get 3.5ghz also but with hyper 212+ but then only can boot when i set 1.45v cpu volt and ram volt 1.65v, didn't try other voltage much though. leave it for quite number of days until hand itch wanna get 3.6ghz, then everything screwed.

I haven't touch ram yet. haha. After I unlocked the X2 555 just test the stability and up the core for fun.

Mana ada $$$ to buy. Still owe "loan shark"

1090T price around RM9xx

is that worth to buy compare to i7

if yes..plan to buy one soon

my spare ram kvr, single channel 2gb, running on 1800mhz CL7 currently, on divider 1:4
so far no problem after few hours gaming
highest fre. havent tested



picture below is the highest stable fre. on 3:10, 1733 requires CL9 and 1.7v on this divider



And on divider 3:8, highest stable fre. achieved:



tweaking/ocing the ram is the most troublesome/difficult part of oc, u will need to find out the most suitable ram slot, divider, timing, voltage or even some not noticeable settings in the bios

after all, it's kingston chips on it

good luck and enjoy on your oc

This post has been edited by MyCJS01: Oct 13 2010, 04:45 PM