sry...i using phone to reply...so didnt change...haha...sry..

already pump to 2.25v vdimm...also no luck to boot...

---

Added on September 25, 2010, 1:55 pmbro..my proc is normal edition not BE..so multiplier is locked...the max multiplier is 11


This post has been edited by nidzamputra: Sep 25 2010, 01:55 PM

could be the mobo htt limit until like that?

if u use 240 for ur bus speed,if i not wrong ur divider is using 333 or 667..

i don't have any idea..i also think why my mobo can detect only detected 1600mhz for HT link & NB

---

Added on September 25, 2010, 1:57 pmyes bro..that right...

This post has been edited by nidzamputra: Sep 25 2010, 01:57 PM

ur mobo htt and nb is using divider??

---

Added on September 25, 2010, 2:00 pmcoz ur nb freq is set at 1600mhz..htt cant over the nb freq,it must lower or same wit nb freq..

This post has been edited by alan kc: Sep 25 2010, 02:00 PM

maybe...but how to know?let i take the pic for my mobo BIOS later...

this is correct.. and also maybe other limit factor as it's not like AM3..

if using divider is like 8x,9x,10x.....if show freq is like 800,1000,1200,1400...

---

Added on September 25, 2010, 2:03 pmor u try to set d highest nb freq,then set ut htt lower little bit..

This post has been edited by alan kc: Sep 25 2010, 02:03 PM

if i set multiplier x11...my NB still 1600Mhz..not impacted the NB freq

yes..i already try to lower down HTT to 1600mhz>1400mhz>1200mhz>1000mhz>800Mhz and NB to 1600mhz..still no luck...

u try to increase ur nb like 10x is 2400mhz d..

---

Added on September 25, 2010, 2:12 pmincrease multiplier not effect to nb,u hav to increase at cpu-nb freq..

This post has been edited by alan kc: Sep 25 2010, 02:12 PM

my TA785GE 128M BIOS setting

CPU Config



T-Series Features



Over Voltage Configuration



Memory Configuration



HT Configuration



CPU FID/VID



G.P.U Phase

ur nb fid try to increase to arn 2400

can't bro..max is 1600mhz only...

if like that,ur mobo limit d...normally nb limit is depens ur freq bus...the core fid can adjust??then ur ram timing all set to auto...

if core fid as your mention...that for multiplier i think...

for my ram setting...i'm set to 5-5-5-18...

Overclock with Gigabyte 890FXA-UD7.
Manage to renew my personal SuperPi score.

U try to adjust d fid see can more higer?

Ooooo wow what a mighty big mobo u have there bro.. U bench naked on table or inside a case?
Another Gskill eco user i see

This post has been edited by cloudwan: Sep 26 2010, 12:42 AM

Wow...nice score xixo...

4Ghz with 1.5+ consider nice edy for air cooling...

This post has been edited by verdict: Sep 26 2010, 03:42 AM