Honda VTEC oil in CPS can get more CPS kick ka.. hehehe..

Few years after engine rebuild, inside still looks sparking clean. I'm glad of using good engine oil lol http://twitpic.com/doro53

fuhhhh...nicee!!!! U rebuild it yourself?

no la sent workshop.

i only opened the valve/rocker cover myself to replace the gasket and doing valve clearance adjustment.

Lol....nearly PM u if u can do my little Lisa. =P

really clean.
even i dont see any burning mark as i usually saw under the valve cover on other cars.
impressive
what eo? torco?

lucky you didn't

ever since rebuilt, i've fed it:
LM semi MOS2 xw40
Torco TR5 semi xw40
Torco SR-1 fully xw30/40 mix
(hopefully didn't miss anything else, just referred back to my records on my phone )

engine rebuilt on september 2011
mileage was 18000
mileage now is 62000 (SR1 is running for about 12k ady cuz i didn't have time to OCI as it's pending for a valve clearance adjustment/valve cover gasket replacement )

so 1x SR1 fully, rest of the 6 OCI is splitted between torco TR5 and LM MOS2 semi synthetics

This post has been edited by Quazacolt: Dec 16 2013, 02:45 PM

By rebuild you actually go and overhaul it? If its a kelisa how much ya agak to overhaul?

yeap basically complete overhaul.

kelisa i think should be within 1.5-2.5k? not very familiar though since i don't own one

Btw..wats d perk of OH?

btw how u drive the car?
always rempit or normal drive?

eventually you need to do to replace worn seals/gaskets/parts. not so much perks as it's more to actual regular maintenance (done every 100-200k km depending on engine condition)

red lining like crazy whenever the chance is there.
done track days including sepang - done over 30-40 laps for 2 hours time within sepang (overheating the entire time LOL!)

some videos that i've manage to do when i'm not sitting on my lazy ass: http://www.youtube.com/user/Quazacolt/videos

take note stock spec/paper sheet on a stock engine 4g15p 3AT is 163km/h and my engine is still on stock form dyno'd at ~60 on wheel hp
that is about 6.2-6.7k rpm iinm

Anyone know whats the difference between LM TopTec and LM MOS?
I prefer the one that reduces engine noises/friction more?(compared above)
And if i am to add the Ceratec..Is it add before engine oil or after engine oil is added?

Thanks

MOS = contains MOS2 additives that is basically nano ceramic particle
actually, going to LM's website should explain everything.

as for ceratec, i think no difference before/after since when you pour everything flows down oil sump/pan and when you start engine everything will mix together

fuhhhh.
then the oils are very good tho.
overheat entire time summore. impressive brah.
i really wan to use Torco/LM. but sadly my car still in warranty.
just done 3rd service at 10k km using caltex fs by proton.
only 1st service at 1k km i got chance to use own eo which i brought LM that time.
then 2nd & 3rd service not allowed anymore since proton applied new term cannot bring own eo anymore.

the oils i used have well over 220 Celsius flash point, you'll be worrying about gaskets before the oil start to cook... and yes i opened up the valve cover to replace the gasket as it's leaking oil ady (you can see the edges from the picture, heavy stains)

and yeah, after 10 laps or so the engine is basically in overheating mode but still managed by (basically just under the red line on the temperature meter lolz)
the transmission was in a worse state as the clutch is slipping already as the ATF overheated

that's what you get pushing stock standard engine/transmission/cooling system

So, what is the OE oil for BMW yea?

Im using it right now on my merc. I like the smoothness and fc. Improves a lot.

Just want to know more about moly.

Currently running on full syn oil. 0-30w if iinm. Tak igt sgt lah code minyak tu.

lol. nice to hear.
btw how much per entry on sepang track day?
maybe after I mod some handling stuff and maybe a little bit performance upgrade then I wanna start developing handling skill at sepang.
what tyres are u using?
sorry out of topic a bit.
and lastly ur best lap time is?

the last one i went was 250 for half court, 2 hours. it is on the high side

tires for my track days = Yokohama Advan Neova AD08R
for laptimes... super slow la: http://twitpic.com/di4ruz http://twitpic.com/di4s6z
but feels good being a bit faster than some CRZ/Mazda MX5