same as mine la that temp...priming 270x9 no problem...but not at stock vcore...hehehe...sissy winnie...need 1.6v
AMD 64/SEMPRON ---- OC DATABASE, Ocing results..OC problem?ask here..
|
|
 May 7 2005, 02:34 PM
Return to original view | Post
#61
|
 
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach  
|
|
Quote|
|
|
|
|
May 9 2005, 05:45 PM
Return to original view | Post
#62
|
|
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach
|
mine la...i'm using Power Ranger's setup...
 |
|
|
May 10 2005, 10:21 PM
Return to original view | Post
#63
|
|
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach
|
quite confusing...
HTT vs Hypertransport??? from what i know... DDR HTT = LDT*FSB*2(DDR) e.g. LDT=3, FSB=250 = 3*250*2 = 1500 DDR HTT... btw...does that gogar's way really works??? |
|
|
May 11 2005, 09:19 AM
Return to original view | Post
#64
|
|
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach
|
QUOTE(arj @ May 11 2005, 02:57 AM) The containers were made by chilly1 from the XS forum. Just received them today maybe u can make sort of documentation from installing till the oc and benchmarking since not many or maybe none around here doing liquid nitrogen cooling...that would be good for LYN  I'll make sure I'll take more pictures when prepping up the board and fixing all the insulation stuff   |
|
|
May 11 2005, 01:39 PM
Return to original view | Post
#65
|
|
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach
|
QUOTE(e-jump @ May 11 2005, 01:21 PM) teh 1st LN2 cooling in malaysia perhaps then should be in Malaysia's Guiness Book of Record la...    |
|
|
May 11 2005, 02:28 PM
Return to original view | Post
#66
|
|
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach
|
seems like a good guide...havent go thru it yet...just to share
http://www.dfi-street.com/forum/showthread.php?t=11397 |
|
|
|
|
|
May 13 2005, 03:24 PM
Return to original view | Post
#67
|
|
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach
|
hey...it's kianwee's birthday today...
so, Happy Birthday to kianwee!!! and may ur future OC kick**s!!! sorry, no present aaa... |
|
|
May 16 2005, 08:29 AM
Return to original view | Post
#68
|
|
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach
|
second to that...but my winnie is no go...stuck at 2.43g...
planning to get a venice or sandy...most probably venice due to short of budget...too many good offer here...furthermore my psu is 20-pin native... |
|
|
May 18 2005, 10:01 AM
Return to original view | Post
#69
|
|
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach
|
QUOTE(hafifee @ May 17 2005, 09:08 PM) if use 20 pin-24 pin converts..will effect the performance or not? depends on your oc la...and system load... |
|
|
May 18 2005, 04:10 PM
Return to original view | Post
#70
|
|
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach
|
looks like 4 fans stacked on each other...
|
|
|
May 20 2005, 01:20 AM
Return to original view | Post
#71
|
|
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach
|
antonio...finish burning already ka? what setting r u using...need a little help here...
|
|
|
May 20 2005, 02:26 AM
Return to original view | Post
#72
|
|
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach
|
QUOTE(winc87 @ May 20 2005, 01:24 AM) For the tref , the best for the ram is 1168. appreciate if u could share ur mem setting winc...  |
|
|
May 20 2005, 02:47 PM
Return to original view | Post
#73
|
|
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach
|
thanks winc...
antonio...how's ur burn-in...mine not so good la...always tons of errors...and when i said tons, i do mean tons...that's why i asked winc for his setting...maybe can start from there...now burn-in testing one at a time... |
|
|
|
|
|
May 21 2005, 08:58 AM
Return to original view | Post
#74
|
|
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach
|
nailed the culprit...i think i got a bad stick...tried one stick at a time...1st one can do 220@2226 with 3.20vdimm...ran for 10hrs...no error...the second one...at 200@2226 with 3.20vdimm...70K of errors without finishing a single round...i did full test...so, set the timing down to the spd...200@2.5338 with vdimm 3.20v...same results...tons of errors...i tested it on yellow dimm...so changed to orange...same result...using 510-2 bios which is optimized for bh5/utt type of rams
and also...that bad stick couldnt load windows at spd...always got that SOB BSOD screen...now using windows using the good stick...aiya...hate to do the RMA thingy... |
|
|
May 21 2005, 11:27 AM
Return to original view | Post
#75
|
|
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach
|
mine is not that hot...i set my 120mm cpu fan to max...air downawrds...with xp120...the fan not only cooling the cpu...but the ram and pwm as well...
|
|
|
May 21 2005, 12:12 PM
Return to original view | Post
#76
|
|
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach
|
already posted.
http://www.bleedinedge.com/forum/showthread.php?t=10390 if managed to RMA, this is my second time RMA with RAM...first time was my Corsair but got back TCCD not very lucky with RAM I guess... QUOTE(dinster @ May 21 2005, 09:19 AM) remysix, i highly recommend u to post your problem here.. they have dedicated OCZ Support Forum... the OCZ support team is great ! give them a try.. http://www.bleedinedge.com/forum/forumdisplay.php?f=45 http://www.xtremesystems.org/forums/forumdisplay.php?f=138 |
|
|
May 21 2005, 12:25 PM
Return to original view | Post
#77
|
|
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach
|
QUOTE(winc87 @ May 21 2005, 11:36 AM) The xp120 doesnt cool your ram as good as putting a 80mm fan onto the fan directly.... of course it's not...i put a 80mm smartfan2 @ 4000rpm to cool down the ram. I'm lucky to get good sticks. but i've yet to do that...still thinking the best way of putting the fan above the ram...other than using spiderman to hang it over... |
|
|
May 25 2005, 08:56 AM
Return to original view | Post
#78
|
|
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach
|
thanks for the info bro...mine is ok i think since at stock voltage...it's 29-30c...
QUOTE(PCcrazy @ May 24 2005, 04:13 AM) I know that a lot of people here and about have been complaining about later A64s being crap overclockers or running hot. If you are such a person, you may want to check the heatshield of the processor with a straight-edge. I had a 05 A64 come into my hands and found that it wasn't the greated thing since sliced bread. When re-mounting the block I noticed that the Thermal paste hadn't spread completley on the centre of the IHS. When I cleaned it and held it upto the light with a straight edge I could see light between the edge and the IHS, the IHS was concave in the centre! So I got out my micromesh and after a good few hours of rubbing the IHS on a piece of glass I got down to a flat surface. It made a massive difference, the temps fell around 5 degrees and the overclockability went up by a good couple hundred Mhz. So if you have problems, I suggest you give this a try. I'd post pics, but I've ran out of AS5 so I cannot remove the heatsink right now. http://www.xtremeresources.com/forums/showthread.php?t=36728 Guys maybe you want to check whether your IHS got the same problem. |
|
|
May 25 2005, 11:18 AM
Return to original view | Post
#79
|
|
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach
|
well bro...u have to live with that...and mine is going for RMA...hope to get back a better ones...how far have push the utt? or r u just starting the testing/burning?
|
|
|
May 25 2005, 12:28 PM
Return to original view | Post
#80
|
|
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach
|
QUOTE(antonio_zth @ May 25 2005, 11:29 AM) as in ur case u got a bad stick....me however are stick which are bad on overclock but runs well on stock speed...so how to RMA... same here...diff reporting between the two...but which one u should saman...ocz or cpuz wished it failed on memtest at stock speed so i can RMA it...hahahaha.....but at the sticker it stated 2.5-3-3-7 but in CPUZ the default value is 2.5-3-3-8...hmmmm can saman OCZ for the misleading info ahh????hahahahha... wanna be the first malaysian to saman OCZ...kakekekkeke...   i just got the RMA # from ocz...the item need to reach them within 15 days from the date of issuance...awaiting for din to feedback... |
|
Topic ClosedOptions
|
| Change to: |  0.0381sec
 0.39
 7 queries
 GZIP Disabled
Time is now: 2nd December 2025 - 12:45 AM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.