Here is mine:

AMD64 E6 3000+ @ 2.736GHz @ 1.632v LBBLE 0530 DPDW
Modded TR ALX800 (IDLE : 40C LOAD : 55C-59C)
LDT multiplier : 2.5X
MSI K8N NEO2 PLATINUM


Still waiting my NINJA from dinster..

Thanx.



This post has been edited by GHz1: Oct 28 2005, 03:37 PM

same like my case, but d voltage is a 'lil bit high thou...

still have no idea y there's such a big jump in temp while ocin for venice...

I'm using modded TR ALX800, which is actually heatsink for Socket 462. May be that is y temp is like that. Don't know the result if I'm using proper cooler for socket 939.

hi...im new here can anyone help me optimize my setting? hhahah sorry for using sucs ram no money now..

below is my current setting, now testing for prime95..

wah alx 800 also so high temp ar, it used to cool down socket A proc well, it should hv better result try to mirror finishing ur based n clean ur hsf, it'll help to drop a few celcius

u should be able to push the proc higher at least to ram limit 133mhz, try to loose the timing n use 1T will gives u higher result, 2T sucks in performance

How do you mirror finishing d based? Using lapping method? I saw the thread regarding this method b4 but dono where..

Is 1T can be applied to all mobos with dual channel?

Thanx.

This post has been edited by GHz1: Oct 31 2005, 06:41 PM

http://www.nvplanet.com/modules.php?name=R...owcontent&id=11

i'm not sure on s939 mobo since i hvnt involve myself into it yet for my knowledge, ya it's more on the ram urself, most of the mobo today can set 1T or 2T in bios, it shouldnt be a problem if u r using 2 sticks, not 4

once i owned 2 stick d43 last time, it can really clock high at 2T but cant set to 1T even at 200mhz, it's a double sided ram... i tested with my frens d43, it's single sided n detected at 1T at default, but single sided cant clock high

it's better to wait sifu to clear the things out, i'm still a noob

on default, all rams should be 1T, on all motherboards
used to be called CPC (command per clock) i believe

me cannot boot when using 1T.. emm act 1T is wat leh...

now running prime 95, jus increases d setting after stable for 2ghz.. now d overall setting is ok a? i can really feel d diiferent after chosing this memory timing... everything load too fast..

put it at stock everything then use A64Tweaker in windows to check
it should be at 1T

nope, it's subjective to d bios actually, juz like my nF3 Ultra.

For my case, the default is 2T.
Btw, I can't really feel the performance different when changed to 1T.

here is wat ive done.. gonna increase d speed later and buy much better ram..




This post has been edited by low yat 82: Nov 1 2005, 02:46 PM

aiks, checked with A64 Tweaker?
even on P4 CPC is enabled by default for all the rams i've tried so far

same ere.u can feel the difference only in benchmarks,especially SuperPI.. bout 1-2 seconds difference in 1MB test

nice temp u got btw the mobo actually is mine, i RMA a new 1 for hollowbean

ai...dun understand ler.. can xplain a... this mobo than act is urs la?

then y this mobo dun flash to d latest bios yet geh??


This post has been edited by low yat 82: Nov 1 2005, 05:06 PM

now trying out 1T (3-3-3-8) setting wit 2.242 Ghz stock voltage, still running prime..

ha ya i changed a new 1 from shop, n hollowbean just used it for few days while claiming his kv8pro warranty i nvr used it though, i oledi got dfi lanparty tht time

oic... no wonder dun flash d bios la... anyway, does d latest bios much better than last time(d one im using)?