This is what we call Sky Ice, insulation needs to be done with wrapping the whole motherboard in plastic bag. Nah, Cut the crap guys, results roll in.

PCcrazy, update this. Thanks

kianwee : any news on E6 at LYP?

Bad news, no E6 from Low Yat. I'm not getting one so soon because apparently not all E6 are good.

heh i said week 25 didn't i?

the ones after are not as good.. and some of them are really bad..

hurm..lidat ka...so have to sticks back to someone 0516 DPJW offer hehe

good news for DFI NF4 DAGF = DFI NF4 Infinity like me

there's a new Beta BIOS available (August 1st, 2005)

using it right now.. far better than the official 2005/06/13

here's the link..

QUOTE

http://www.dfi.com.tw/Upload/BIOS/CK84D801.zip

Beta - 2005/08/01

1. Patch TRC, TRFC, TRP setting incorrect. 2. Patch DDR Output driving makes no effect after save and exit. 3. Refresh Rate (TREF) adjustment method turns into cycle time. 4. CPU Voltage Control: 0.025V each step.

anyways,

in my Super Bulk v7, there will be OEM AMD64 Venice Rev. E6

This post has been edited by dinster: Aug 14 2005, 12:01 AM

who say lowyat no E6?

i jz got mine 3 days ago from there

Rm290 sempron 2800+ 64 256 cache,S754 1.6G

me using asus K8N...anyone teach me how to overclock?

rite now me using ddr266 old ram..if want to overclock get performance ram?



cpuz

cache

they're talking about Venice ler, not Palermo

Hey din,
thanks to let me know got the new BIOS
testing in now .

EDITED:
the CPU Voltage Control after 1.550v will step up every 0.1v up to 1.850v

mean i have no chance to use 1.600v straight go to 1.650v
too bad........

This post has been edited by ahpaul82: Aug 14 2005, 03:18 AM

Ok, here is my Venice 3000+ OC result

-AMD64 3000+ Venice (295x9=2660MHz, 1.650v, Stock fan) STEPPING : LBBLE 0516CPBW
-2x512MB Corsair XMS TwinX DDR400 v1.4 (2.5-3-3-7, 1T, 3.0v)
-DFI NF4 DAGF (BIOS 801) chipset voltage 1.7v

Screenshot:


BIOS setting :


Temporary Setup:


This post has been edited by ahpaul82: Aug 14 2005, 12:28 PM

ahpaul82@ whats the temp like on stock hsf at 1.7v ???

I thought you can know it from second sceenshot ?

around 41~43c gua , and the voltage for my processor is 1.650v, not 1.7v. 1.7v is chipset voltage thats why i use a 12cm Panaflo fan blow at the side coz too HOT !
another 12cm Nidec blow to the RAM.

Dont forget i test it without put into the casing .

ahpaul82@ sorrie just now only able to see the 2 screen shot

now can see all already...

why so nice temps ??
air con ??
i am doubting my XP-120 performance...

thanks ahpaul, for sharing your BIOS settings..

currently i'm stucked at 270 HTT..

but i still use stock chipset cooler

perhaps that's the culprit

is it just me and ahpaul82 who are using DFI NF4 DAGF/INFINITY ?

This post has been edited by dinster: Aug 14 2005, 03:45 PM

at 270HTT my ram can run 1:1 , more than that need divider

currently my AMD64 just for Folding and BT only
hehehehehehe...

ya, tak kan only me and dinster using DAGF gua ???
btw, where is your screenshot ?

thinking it is worth switch to DFI NF4 LANPARTY or Infinity SLI-D or not ..
coz want to play play SLi

wait for Crossfire better..

DFI Crossfire board + 2 x X800GT

malaysia don't know when will get them..

but we will be able to get them soon
http://www.nintek.com.au/x/Scripts/prodVie...?idproduct=2415

http://www.nintek.com.au/x/Scripts/prodVie...?idproduct=2251

X800 GT can crossfire ??
i tought must be the 16 pipeline.....

Mostly won't change now, unless someone want to buy my DAGF lor
anyone ?

Will wait until Oct or Dec and see how .
The reason i want go for SLi is becoz SLi more common than Crossfire...i think.. and more cheaper perhap ?

Plus, 2 x 6600GT is the best choice. Can get one of 6600GT now and another maybe 3months time later ..
Hopefully that time <RM600 can buy 6600GT already