u should try on msi neo2 nf3.
i've try those ram at yours can go up to 27+mhz

i know 1 place u still can find them but have to ask
try mypc.

yep lots of them dtd43 even i got few of them in my cc.

i bought my dt-d43 ledi.
but its 3-4-4-8 (apacer)
should get a corsair vs (2.5-3-3-8)...
is it(3-4-4-8) very slow?




cant see my ram timing with cpuz. how?

This post has been edited by Xeon7222: Aug 18 2005, 11:38 PM

Default timing for Kingston Value RAM is 3-3-3-8 ma
so nothing wrong there.
anyway, i saw 2.5-3-3-8 Kingston Value RAM b4.

Hynix chipset can easily do CL2.5,
If you are lucky enough can do CL2.0 too.

you can download lastest CPU-Z and see can detect correct your RAM timing or not.

was able to do 255 @ 2.5-3-3-8 @ 2.8v

on 253 @ 2.5-3-3-8 got pic...

by the way anyone interested planning on selling them its new also.....

just a question here.
I have 2 sticks 512mb BT-D43 with me.

I tried to raise the fsb to around 230 with 8-3-3-3 (SPD) and I get error in SP2004 ram stressing.

Since I don't really care about timing, I just raise it to 8-4-4-3 and now the ram is stable in 250fsb even after 12 hours SP2004 + Folding.

My question is like ahpaul82 said, Hynix really can easily do CL2?

I thought BT-D43 mean for very loose timing but super high fsb?

latest cpuz also cant detect my ram timing. any other program?
my dt-d43(apacer) SPD is 3-4-4-8. but SiSoftware Sandra and everst show tat is 3-4-4-( 5 ). i did set my ram timing from 3-4-4-8 to 2.5-3-3-7 n also 2.5-3-3-6 in bios. it show tat is 2.5-3-3-( 5 ). y?
now trying to to cl2.

as long as it is running stable on that tight timing ok laa...

cl2... cant boot ler...
but then now i set it to 2.5-3-3-6. running stable n finally sandra show 2.5-3-3-6, but everest still the same(2.5-3-3-5).
cpuz cant show my ram timing ler... can any1 help me.


Edited: dt-d43 rock!!!

This post has been edited by Xeon7222: Aug 19 2005, 03:56 PM

at what speed and voltage xeon?...

This post has been edited by CHICANOS: Aug 19 2005, 04:10 PM

try put it on nf2 base if u lucky enuff u will see miracle at 2-2-2-x
around 200fsb with dtd43 moderno can confirm this.
usually i dont care bout the end number for the timing.
the most importang is 3 first number.

Wow... you guys are seriously lucky with your RAMs. My pair could only do 245 MHz 2.5-4-3-11 on dual channel.

burn it in at stock clock and tight timing with high volt.
that should do

the previous owner of my ram burn this DT's so cantekly... oso with rzonealley burning it sometimes with his neo2 platinum...

my dt's on zamree7 nf2 (previous owner) can go 2-2-2-x 200fsb....haven't tried on my DFI yet...

My Kingston 2 x 512MB DDR400 (Hynix DT-D43)
able to do 2-2-3-11 DDR400, 1T up to 208MHz or 210MHz only i think.. can't realy remember.
2-2-2-x DDR400 in 2T



to allenultra :
actualy all depand on L.U.C.K

on 1T or 2T?...what volt?...

cannot remember la bro...but i think does not surpass 2.9v lidat... have to ask zamree7 there...

yeah... my dt-d43 after burn can do 2.5-3-3-5 @ 1t 250mhz ( can boot but not stable). curently using 3-3-3-5 @2t 260mhz and playing games without a prob.

same result as ahpaul there.

2T = 2-2-2-11 @200mhz, 2.8v on nf2(asus)
1T = 2-2-3-11 @200mhz, 2.8v on nf2(asus)

1T = 2.5-3-3-7 @264mhz, 2.8v on nf3(msi)
2T = 3-4-4-10 @272mhz, 2.8v on nf3(msi)

bootable 277mhz.

on DFI this ram max at 256fsb oni....arrghh...why DFI hate hynix????

wan...that previous reading above zamree7/my ram ka?...or urs?

haha dun be surprise the gem is in ur hand bro.
mine so far can do 264 easily.
more burning in.
coz that ram at urs got proper burn from me.
should say thank to my ai7 n msi though.
that printscreen is on msi neo2 plat.