My sticks are crap! On my P4, 240Mhz 3-4-4-8 2.9v hangged after 4 minutes of Memtest. 238Mhz went on for about 30 minutes before I exited Memtest....

guess mine considered gem la aiman...

253MHz 2.5-4-4-6-1T
275MHz 2.5-4-4-11-2T

got numurous rants bout the newer batches of DTs and BTs..

but i feel like letting go of my pair.. anyone interested? pm me lor..

my previous BT-D43 can do dual channel (2x256) 260mhz, 2.5-4-4-11-1T prime stable, on nForce2. memtest stable up to 265mhz. all using 2.9vdimm.

forgot whom did i sold to last time....

yeah nice ! mine 1 same as urs..... still using it now... but my rams dun like CL2.5 .... but when i set to CL3 i got same bandwidth as CL2.5 i get i guess maybe will fly more on intel

Mine can do 250mhz at 2.5-4-4-11 timings with 2.9v but got error when i do memtest last time.. guess mine are bad sticks but still considered ok coz can go 250mhz. I know someone with 512mb d43 which are double sided that can go 255mhz at 2.5-3-3-11 with his nforce2 setup. A nice fsb n timings i can say.. I didnt know d43 are still rams that ppl are searching..

i've tried overclocking my bt-d43's to 250 at dual channel but i get artifacts while playing games...how do i fix this ? i've set the vdimm to 2.8v and timings at 3-4-4-8

artifacts ? do u locked ur PCI/AGP bus ?

yea..the pci/agp is fixed at 33/66

on some systems... when OCed to 250+FSB, BT D43 will corrupt your graphics.. This is very true, Uncle Bwan has proved it...

so how do i fix this prob ?

i'm still confuse
DT-D43 or BT-D43 better??
Can anyone tell me why??

This post has been edited by evilhomura89: Mar 23 2005, 10:41 PM

Calvin : To fix this prob u have to downclock somehow..

evilhomura89 : Which one better? It depends on the stick itself. Even BH5 have bad sticks so it depends on ur luck.

there are still no fixes for this... sorry to say...

found one btd-43 can do up to 264fsb...

and it on sale

http://forum.lowyat.net/index.php?showtopic=139863

I'm currently running 2x512mb DT D43 @ 212fsb, dual channel,CL 2.5-3-3-8 @ 2.45V (load)

hehe , my bt-d43 can do

275Mhz @ 2.5-4-4-10 1T 1:1 divider @ 2.9V ( able to run superpi and memtest )

285Mhz @ 3-4-4-10 1T 1:1 divider @ 3v ( able to run superpi and memtest but reboot after awhile )

screenshot of 285Mhz @ 3V

my ram very funny not much difference even though change from CAS 2.5 to 3


Attached thumbnail(s)

heres mine ...
bt-d43 at 3-4-4-8 2.8vdimm...and also at default vcore

DT-D43 is clearly better.

Sadly its very hard to find a good dtd43..arj dtd43's was a nightmare for us "the budget overclocker".

i'm still experience thermal throttling problems once in a while...
but temperature doesn't even go through the 50c barrier until full load...this is just weird