even BT-J + BT-D43 also can ... not to mention BT-D43

even some ppl are using CH-5 with BT-D43 for dual channel

How bout this DTD-43 doing 277fsb... thanks to zamree7 for lending his ram n do the testing together...
i think i need 2.9vdimm to get this ram max out...
mine only max out 264fsb 1T...

see the attachment


Attached thumbnail(s)

offtopic: How do you get the 264MHz @ 1T without problem? Mind to share?

So the answer is yes is it??

BT+DT = Dual channel

using here almost 3 years and runin fine!

dunno if its work on others, i used my amd rig to test it on Neo2 Platinum.
264fsb 1:1 2.5-x-x-x 1T at 2.8vdimm n i noticed DTD-43 dont like divider.and i use dimm 1 and 3.
and i'm on 1.36beta modded bios.
didnt thinkin bout doing a print screen coz thought its just an ordinary result
will do the print screen later coz still cant reboot my system due to priming at 250fsb 1:1 2-5-3-3-6 1T at 2.8vdimm.

This post has been edited by rzonealley: Mar 20 2005, 02:12 PM

what memory chip is used in the new batch of KVR??

I know it is packed in a paper box rather than transparent box

still can find DTD-43 in LYP but only for 512m ram... not 256...
try searching in Czone Cycom Robyncom. wish u luck huhu

I just came back from LYP,m bought 2X512MB or DT-D43 from MyPC for RM400. Forgot to check how much stock they have left

Will do some overclocking later

aiman, u got new ram at last.. wanna let go ur ocz pc4200el?

Nope

The DT-D43 will be my spare RAM

hmm looks like our sifu bought a d43 at last.. is this mean dt-d43 is better than bt-d43?

I think BT-D43 is better. I was looking for them but they're nowhere to be found.....

laaa... aiman... u bought a pair of DTs???

letting go of mine actually...

u wanna let go ur DTs? same ere.. i wanna let go my BTs as well hehe

Lepas beli baru la everybody wanna sell off their BT-D43

i think dt performs better than bt, since most dt are able to do tighter timings and higher fsb than bt, but there are some bt's which are capable of really high fsb, but it's kinda hard to get a hold of a good bt. just an opinion. do post us the results arj, ppl here would be really interested in the results.

just wondering whether i can use my apacer 512 ddr -3200 with another brand of 512 ddr-3200 to utilise dual channel....do u tink it will work on my intel perl865 mobo?coz if it does then dun need to get 2 new pieces of 512 then....

hope to see some result to arj.

zamree7's DT can do 2-2-2-5 2T at stock vdimm at 210fsb but didnt test any further since we wanna test the highest fsb the ram could handle.

and as i mentioned above the ram max out at 277 with my limited vdimm at 2.85v. i'm sure it can go more with 2.9vdimm. but yet its only the highest it can go but not memtest past.

512x2 so far memtest past at 260fsb at 2T timing.
compared to 256x2: the 256x2 could handle more tighter timing
and memtest past at 1T timing is 263fsb 2.85vdimm.
maybe this is due to the different between the single sided and double sided chip of ram.

btw hope can see some impressive result from u arj.
best regards.

eh, i tot DT is better?
my BT can do 2.5-4-4-10 at 260 no divider though.