guys...
guess what,
my sis got a pair of GEM --> dtd43..
pinjam hers [which is not yet burn in]
n see what i get

p/s: vdimm 2.8v

This post has been edited by e-jump: Apr 1 2005, 12:13 AM


Attached thumbnail(s)

its 1T..
my mobo got issues with 2T (which is max htt same as 1T )
btw, juz got the ram juz now..
but i doubt can pass with that timing (2.5-4-4-x)..
maybe 3-4-4-x harapan cerah
will try tonite or tomorrow

owh man.. memtest got error beyond 260++
but i can superpi up to 270...
since im not doing major computation, what the heck
juz 1:1 with cpu

p/s: its definately alot better than my btd43

yeah, its 1T..
i never succesfull tried 2T coz this mobo suX with ram at 2T

what i experienced, dt is better than bt...
now still doing some burn-in.. cant do much with 2.8v tho

make it simple...
UTT > tight timing, high vdimm, need ddr booster, blowing fan to cool ram
D43 > loose timing , moderate vdimm[2.8~2.9]

assume both at 250+fsb

yeah, dfi no need booster..
but i state there as universal case.. n most d43 n utt can achive 250 [rare case that not achive that, or achieve friggin high]

vdimm got nothing to do with cpu

try cpc off..
maybe issues of double sided rams

This post has been edited by e-jump: Apr 5 2005, 03:12 PM

hmm... double sided is not dual channel bro

to disable dual channel, juz put the ram in slot 1 n 2 [DC is on 1 n 3 rite?]

ok.. memtested my dt-d43..
on 1T, can go up to 265..
but on 2T, only 270++ aje..
both on 3-4-4-x...
u guys on 2T can go how high?

correct
cpc on=1t, off=2t [on most nforce2 n other older socket board]
later platform will use 1T n 2T
if there's no option for this in bios, either u can use A64tweaker, or say hallo to 2T the rest of ur life

i suggest u set it manually.. coz u can adjust the timings [try 2-2-2x if u wanna extreme oc with vdimm=2.8+v, or 2.5-3-3-x for slight oc]
IMO, there's no point ram runs faster than ur proc, so set it as 1:1 instead

madness...
i hope i got a spare rig to burn in a week, n wish it'll go 300

p/s: now only 265 1T, 272 2T :?

This post has been edited by e-jump: Apr 25 2005, 05:54 PM

be patience my friend..
try manual timing config 1st
its a lil tough for u coz nf2 boards didnt like so much to pir it with double sided rams

CL2 at 200fsb with vdimm 2.9++v i think can [those ddr400 modules]

btw, memtest using std test for 12hrs at 265 3-4-4-10 1T DC, got 26errors la after 68pass

This post has been edited by e-jump: Apr 27 2005, 08:49 AM

bt n dt r known as high potential to oc..
but its not confirm 100% it will perform, where luck also play major role here..
try getting bt n dt fron 2004 batch
how to know what batch? i also donno how to differentiate

scud, try 3-4-4-x n see how high at 1T

hey DT-D43 users.. push till 270 lar..
u guys can feed em with more volts, unlike me

gosh..

the 2.9v is vdimm >_>

if u guys r playing at freaking high frequency w/o going above 2.8v, the worse case scenario would be juz windows got corrupted..

but beyond 2.9v [ie goes 3.0v++] a ram cooling is recomended [blowing fan etc]

btw, my dt-d43 dont go beyong 265 @ 2.5-4-4-11 1T ~_~;;