If you run on slot 1, it will cover 90% of the chipset fan. But it won't affect the temp. Not at all. I'm using ATI Silencer 5.2 =D

thanks for ur info kianwee....hurmm...now have to save some money to grab that AS6...

btw..there might be this similar question have been asked before...but may i ask, what are the cheapest good rams that can be paired with DFI Ultra-d?...

value vx / gskill GBGH

see what i told u aledi.,...

told what...when...what???

betul la...might hunting for this ram soon....slurppp... ...mau tiru en.antonia setting.....boleh ka?....or perhaps wanna let go urs?....saw u a lot in dinster ram bulks... looking for more power ram i foreseen in antonio lust...

got a question to ask lagik to dfi sifus here:..

here is my screenshot of ITE Smart Guardian

i think the vcore is quite high la... ..me dunno anything on OC...

just using the bios setting provided here : http://www.dfi-street.com/forum/showthread.php?t=5844

just used this setting my computer can run smoothly...before this always stuck up at windows installation....

so i'm quite worry if this reading is okey or not?

me using A64 winnie 3000, nf4 ultra-d, kingston kvr 256x2 (cap ayam)...plis anyone


Attached thumbnail(s)

Your pic is quite small, I have to stretch my eyes a litl' bit to identify those values. Your vcore is 1.53, stock vcore for winnie is 1.4v. The safe voltage for winnie on a good air cooling(below 50 degrees on 100% load) is 1.65v. So you are pretty much on the safe side.

ha ha ,i also use tat settin,now my rig can run 300@3-4-4-7 fsb/cpu 300*8 vcore 1.36v 32m superpi pass

thanks bro for the info...lega sket dengar...btw i'm bringing my rig to serdang to be paired with rzonealley twinmos to test my rigs ho far can can go....mai la dtg sekali...lama tak jumpa bang muaz...huhu

u've said that stock vcore for winnie is 1.4v...so the setting that i've used increased my vcore to 1.53 eh?...i've tried to raise the fsb to 220 using this setting and my cpu sometimes freeze then restart, if lucky it can go on but can see some like artifacts on my screen....so the ram stuck at 200 (stock) only?

Call me, it has been a long time bro, I will bring my winchester for testing as well...

Is it just me or the 623 bios bring back the ps2 mouse bug?

Any 623 user here?

ah~~~ the joy and fun of testing beta bios, syok nya~~

anyone pair DFI nforce 4 ultra-d with kingston Hynix BT-D43 without any problem ?

i think dfi and hynix hard to be paired....if can..i've got standing 1gb bt-d43 to use...dunno if it can be pushed with dfi ultra-d..

i saw that in your sig (DFI LanParty NF4 Ultra-D : Kingston KVR 256 x 2),you are pairing them ? can show some detail ar ?

now in the middle of trying to fit the dt-d43 512x2 on my ultra-d...currently running at 260 x 9 : 2.340...but afraid to push higher...still doesn't run any test yet...have to wait for my sifu rzonealley back from pasar malam..hehe...me still newb on oc stuffs

using my previous kvr 256x2 cannot exceed HTT 220....dunno what chipset used on that piece liou...now on this hynix dt-d43

I have a few pairs of BT-D43s and DT-D43s here, there are absolutely no problem running at stock.

can i know the timing for both the ram BT-D43 and Dt-D43 ?

I use official bios 310 and set everything @ default (load optimised default) except
the first 6 in Genie Bios:

200
enable
3
3
8
3

Try with one stick first on the orange slot furthest away from CPU if you have difficulties booting.

If you can run both rams with that timing, you can go

2.5
3
7
3

Good luck