for 100% comfirmation, just open up your chipset heatsink, then you will know

my sticker on the last pci slot din mention A02 or 03 but only AA0

Evogenix

on the CPUz
but to confirm, just open the chipset to compare with older chip which can be modded..

it is a hardmode or softmode

It is a hardmode.

it's a hardmod which is not that hard at all...

What's the original cooler's temp versus the vantec? I also bought one..belum pasang only.

That's cos u using newer than march bios mar.

ya ka???i used the 310 bios...also got the same from cpuz...but nvm...as long as the chipset is moddable...i dun care about what cpuz reported...already check the chipset when i put the as5 on it...

hi.. i just want to ask, anyone have done OC with fsb 340 with dfi ultra-d.

& for people who have done OC 1:1 with fsb above 250. what u set for htt multiplayer... 3x?

if im doing 1:1 with 260fsb and set the HTT multiplayer to 3x, so HT value is 260x3=780. does this HTT value play an important role in overall performance..........??

I did 333Mhz 1:1 a few days ago, will try to go over that with dividers after this

The HTT value doesn't affect the performance at all....

i set the LDT/fsb to 3x when oc-ed over 250htt
if you goin for 340htt, set the LDT/fsb freq to 2x

high htt wont give you much improvement in your overall performance.
so, low htt freq with high clock speed will be the best setting for amd64 system

Evogenix

Here's my max HTT after a quickie oc session

i believe it's more for your system stability rather than performance...that's why when u go more than 250, it would be best to have x3...and x2 if more than 270 (if not mistaken)...
is it correct??

damn...if only those thing can go without the divider
but the SuperPI is not that good when using divider huh...or r u running 2M test, arj?

This post has been edited by remysix: May 4 2005, 02:01 PM

mine 1 is 370


Attached thumbnail(s)

I'll be gunning for you numbers tonight ray

what is ur mem running at?and do you mind to share ur mem setting, bro ?my mem is corsair 1gb xms pro as well.

go arj! hehe sorry for keeping ur fx with me for quite a long time.. err and there is still 1 week more to go

Hehe irenic, you and the FX too enjoying a holiday eh! Damn, just can't wait for my SLI-DR to be approved for RMA. My CAA2C sitting in the box doing nothing now!

Why not just get a new board? you can sell your SLI-DR after RMA. If i were you, I can't wait that long.

i used divider coz my corsair cant do more than 240MHz ...
have to get the ocz special ram for this DFI nf4 .. lol