wanna know for users of lanparty nf4.... do u guys connect all 4 power connectors on the mobo?? just wondering since my rig never got stable with just 2 of the main power connectors attached

under Option just raise the temp for the "High" setting
the default is kinda low so most of the time you'll see it being red

anyone here using dfi infinity with latest kingston ddr400 256mb? my one cannot run dual chanel. cannot go in windows n install windows in dual chanel mode but single chanel ok. i dunno wat is the ram chip maker but they hv something like a window mark on it.

damn slow in single mode

It's true if you look at DFI-street that the DFI NF4 boards don't like Hynix :-(

wanna ask u guys, anynody here using enermax noisetaker psu and mobo dfi nf4 ultra??

it seems my rig is not compatible with the psu, i can't make it pos

i'm using a AMD64 Venice 3200+ with DFI NF4 Ultra Infinity and BT-D43 RAM.. i able to clock till 250 and the multiplier is 8x.. the setting at bios is stated my proc is running at 2.0ghz(250x8) but when i log in to windows and i use the cpuz software to check my fsb, it is only 200  how come like that? i juz freshly install the windowsXP SP2.. somehow, the multiplier do show 8x but why the FSB 200 nia? i set automatically for the RAM timing and speed.. voltage at stock (tried 1.65V also nothing happen).. anybody care to tell? coz the bios already stated it is 2.0ghz, cannot be windows only detect as 1.6ghz (200x8).. please advice

that's y i'm so confused now, my enermax psu is not working properly like the guys in dfi-street

i'm thinking of selling and get dinster's psu or keeping my enermax

btw, gengstapo, i update to the latest 1 still cannot la

FSB is the HTT for AMD64
when they're the same thing, if u adjust 1 the other will be changed too right? (logical)

tried all 4 slots, just wont boot .. sien sien

will try to winflash some other day (no floppy.. haha)

try the 704-2 http://www.dfi-street.com/forum/showthread.php?t=22997

or try switching to different slots

they're probably modded ones?
not too sure about that

Mine sometimes will start sometimes not.Using Twinmoss,weird no one could answer me

atleast his KVR runs...
my corsair VS and apacer won't even start the system... (not even boot screen)

Tried 3 bios.... all can't work...
dunno is it my 3000+ ES fault

DFI street mod told me it is my PSU problem (FSP BLue Storm 400W)
below is the specs i get from my PSU homepage, sifu.. can confirm is the PSU underpower?
[attachmentid=82885]

sorry me noob here   which setting apply this 3-4-4-8 bcos there r lots of ram setting

got a problem here....whenever my comp hangs, i pressed the reset switch..but after that the comp will sort of like keep "rebooting" i gotta shut off the main power and switch it back on in order to restart...anything wrong with my settings?

alright..but how much is much? Sempron from 1.6ghz to 2.64ghz a lot? Vcore 1.589v Vdimm 2.80v and chipset voltage 1.7v

y not usin 183 divider instead if ya ram can't do 1:1 @ 250MHz? 

if d voltage used for both is d same, I'll go for higher clockspeed...