Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed
5 Pages « < 2 3 4 5 >Bottom

Outline · [ Standard ] · Linear+

 DFI nF3/4 series (LP and Infinity) users come in, Overclocking ability and troubleshooting

views
     
gengstapo
post May 24 2006, 11:29 PM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
QUOTE(hellwaker @ May 24 2006, 11:22 PM)
I myself will be switching to UltraD soon, I am using Kingston valueRAM ( 2 x 512), which dimm should I try with? Any UltraD user with Kingston valueRAM can share your experiences? smile.gif
*
i use the orange color slot currently wif my spare RAMs KVR 512mb x2 wif BT-D43 chippy. manage to hit 285HTT(PC3800) at 2.7v
gengstapo
post May 27 2006, 11:12 AM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
QUOTE(hellwaker @ May 27 2006, 09:48 AM)
Here are my spec:
Proc: Opteron 144 (bulk from Dinster, able to hit 2.9 like kacang, but I cannot) sad.gif
MB: Lanparty UT UltraD
RAM: Kingston ValueRAM (2 x 512)
HSF: XP90 with delta sense flow.
GC; XFX 7900GT

Any advice from sifu?
*
haa.. haa.. haaaa.. dya expect to get 3.0Ghz wif KVR wif cheapop chippy?? dont dream laugh.gif

QUOTE(gsan @ May 27 2006, 09:49 AM)
bro, kinda high  sweat.gif  mine now priming at 2.8G @ 1.43v in bios reading or 1.42v in DMM reading, using xp90c pair with 92mm fan @ 2.2krpm, 38~39'c
*
yeahh. opteron were hot. even mine 2.85Ghz@ 1.37vcore, load can reach 55c sweat.gif
im using XP-90 wif 80cm delta fan@ 25++krpm
gengstapo
post May 27 2006, 11:35 AM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
QUOTE(hellwaker @ May 27 2006, 11:25 AM)
May 27 2006, 11:12 AM
haa.. haa.. haaaa.. dya expect to get 3.0Ghz wif KVR wif cheapop chippy?? dont dream  laugh.gif
You men the RAM?
*
ya lorr. KVR using alot chippy & the well known can get higher HTT was BT-D43. im oso using KVR currently & the MAX gan trigger is 285HTT. u need samsung base chippy to get higher HTT smile.gif
gengstapo
post May 27 2006, 02:09 PM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
QUOTE(ikan_semilang @ May 27 2006, 02:06 PM)
Noob question: How to check? Need open and applied AS5 back then put it back? sweat.gif
*
sure maa. how can u check the HSF were properly seated if u didnt dig-out whole thing including Mobo laugh.gif

ps : my way is, b4 pasang HSf, take out all item & onli then seat the HSf
gengstapo
post May 27 2006, 02:37 PM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
QUOTE(gsan @ May 27 2006, 02:31 PM)
@gengstapo

your 146 able to hit 3Ghz @ what vcore?
*
havent try yet bro. im stuck at 285HTT onli. i dont have any better RAMs. currently using spare RAMs, cheapop KVR wif Bt-D43 chippy sweat.gif doh.gif
gengstapo
post May 27 2006, 09:24 PM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
QUOTE(hellwaker @ May 27 2006, 05:33 PM)
Chep RAM can go 285HTT nice lah, me only can get 260HTT with 166 divider. tongue.gif
*
me on divider oso, 5:6 tongue.gif


QUOTE(gsan @ May 27 2006, 05:46 PM)
run 166 divider, the ram should be run in 250MHz  smile.gif
*
currently running PI Calculation 32mb on 2.9Ghz, on divider 5:6
the magic stepping no more when reach the 2.9 barrier. voltage feeded was 1.42 now sweat.gif sweat.gif
temp was 53~55c, damn!!

This post has been edited by gengstapo: May 27 2006, 09:25 PM
gengstapo
post May 27 2006, 09:46 PM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
QUOTE(gsan @ May 27 2006, 09:35 PM)
woow, 1.42v only  drool.gif
*
update 4 ur info. my RAMs cant do 300HTT even at 5:6 divider. i think that is the max for cheapop BT-D43 can do. i pass the 32mb calculation but when i put 300HTT even at 1.55vcore, my system cant boot, probably by my RAMs. so, unofficially current highest attempt was 2.9Ghz@ 1.42vcore. rclxm9.gif

how bout urs?? mind to share thumbup.gif
gengstapo
post May 28 2006, 03:40 AM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
QUOTE(gsan @ May 27 2006, 11:08 PM)
mine is bad... 2.9GHz need 1.54v to prime stable and yes, now still priming.  sweat.gif
*
ic.. mebe need more tweaking & bun-in smile.gif


QUOTE(Westley @ May 27 2006, 11:46 PM)
at least u all may do 275 above.
*
yeahh. opty family was superb notworthy.gif


QUOTE(ah_khoo @ May 28 2006, 02:40 AM)
bro, u mean u can run d43 on lp board w/ 1t?  blink.gif
*
err.. i guest so. is there any prob runnin' hynix chippy on LP board?? sweat.gif




Attached thumbnail(s)
Attached Image
gengstapo
post May 28 2006, 04:43 AM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
QUOTE(ah_khoo @ May 28 2006, 04:33 AM)
thx for d clarification bro, heard dat lp boards dislike hynix chippy, dats y i opted for utt, who knows my pair of utt not doin well...  sad.gif

am2 is around d corner, hopefully afta it's launched i can get myslf a DC opty... more core more fun...  laugh.gif
*
hehee.. no sweat. regarding the AM2 processor, have they arrive to local market yet?

ps : im not going to move(AM2) near future until finish messing-up wif my opty thumbup.gif

This post has been edited by gengstapo: May 28 2006, 04:45 AM
gengstapo
post May 28 2006, 10:53 PM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
QUOTE(SHOfrE3zE @ May 28 2006, 10:35 PM)
guys i have a prob here.. It seems that whenever i turned off the wall plug switch to my pc and turn it on , the bios will give a warning and stated that it's in safe mode. it ask me 2 like reconfigure the cmos setting. My settings all were reverb 2 default setting. This doesn't happen if i just left the wall switch on when i shut down my pc.

Another thing is, now i can't o/c my opteron to 255 fsb which i always do. My pc will hang during start-up. I can't even reach 240 fsb without getting hang. I suspect that my mobo's batt. causes the prob.

any1 can help? pls..thx
*
mebe ur battery CMOS weak ady.. laugh.gif
gengstapo
post May 28 2006, 11:16 PM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
QUOTE(SHOfrE3zE @ May 28 2006, 11:12 PM)
^ i hope so.. it's better than getting my cpu or mobo spoilt..

btw, does weak battery really effect my o/c potential?
*
sure laa. low batt will reset all ur BIOS setup when ever u turn-off. so, ur OC setting need to be re-configure shakehead.gif
gengstapo
post May 30 2006, 01:56 PM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
QUOTE(hellwaker @ May 29 2006, 12:02 AM)
This is what I have after some tweaking....

1.) 280HTT x 9 with divider 100Mhz
2.) 240HTT x 9 with divider 200Mhz

Which one is better for gaming? HF2 Source. BF2...
*
both oso can use larr but then, depend which u think nice when running all of ur daily task.. thumbup.gif
gengstapo
post Jun 1 2006, 08:28 AM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
QUOTE(rzonealley @ Jun 1 2006, 04:15 AM)
official and big toe...
official which vers?
big toe i try to find it
*
bigtoe BIOS was wonderful. using it lastime, but then switch to the official, gain lil' improvement.

ps : using bigtoe, RAMs stable at 2.7vdimm, using latest official BIOS, RAMs stable at 2.6vdimm laugh.gif
gengstapo
post Jun 4 2006, 12:21 PM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
QUOTE(satanhead2003 @ Jun 3 2006, 01:00 AM)
Mine is 146 using wc as in siggy. Idle is 29c-30c n full load is abt 36-38c. Vcore is 1.42v . smile.gif
*
is that vcore u get from ITE Smartguardian or BIOS reading??


QUOTE(Westley @ Jun 3 2006, 01:20 PM)
guys, i found out that when i raise my LDT voltage, and it will allow my proc to run at a lower voltage.
*
izzit?? gonna try it out leh icon_rolleyes.gif
gengstapo
post Jun 4 2006, 02:46 PM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
QUOTE(soulfly @ Jun 4 2006, 02:05 PM)
how much does a used s-754 LANParty UT nf3 250gb worth nowadays?
*
wahh.. getting AM2 arr?? laugh.gif icon_idea.gif
gengstapo
post Jun 8 2006, 07:07 PM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
QUOTE(gsan @ Jun 8 2006, 07:05 PM)
i'm using the bios at this moment, no problem so far.
*
tat nice. how ur opty goin' ady?? biggrin.gif
gengstapo
post Jun 13 2006, 11:11 PM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
try raise the voltage
gengstapo
post Jun 14 2006, 11:48 AM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
QUOTE(ashraful @ Jun 14 2006, 11:46 AM)
guys.. new here..
i just wondering.. now im using DFI NF4 ULTRA infinity...
can i FLASH my BIOS with the LANPARTY one?

bcos some one asked me to flash the bios.. but then.. when i checked it back, the link was for LANPRTY UT NF4...

is it the same? and if i can flash it... tell me k? thnx thnx thnx~!!!
notworthy.gifnotworthy.gifnotworthy.gifnotworthy.gifnotworthy.gif
*
nope. u kenot.
thanks 4 asking
gengstapo
post Jun 14 2006, 05:17 PM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
QUOTE(sniper69 @ Jun 14 2006, 04:55 PM)
yes, after being able to hit 2.9 using clockgen, i use the bios, but not that at 325HTT, 322HTT instead...  sweat.gif

[attachmentid=114485]
*
let say give it a chances to run 32mb calculation? if pass, then preety sure ita stable ady icon_rolleyes.gif
gengstapo
post Jun 14 2006, 06:45 PM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
QUOTE(kingmaker_20 @ Jun 14 2006, 05:25 PM)
I don't think it will pass.Clockgen clocked 325 HTT (cpu-z 1.392v ) while bios clocked 322HTT (cpu-z 1.44v).Clocking with clockgen is easier comparing clocking in bios. icon_rolleyes.gif
*
tat Y im suggesting to run 32mb PI Calc to test stability. if it pass the 32mb, sure can pass 3dmark, aquamark or pcmark. icon_rolleyes.gif


QUOTE(sniper69 @ Jun 14 2006, 05:34 PM)
i've ran it at 322HTT at 32M, failed  doh.gif , primed for 3minutes, failed  doh.gif , 3DMark03 oso failed  doh.gif , but in gaming for long 3~4 hrs, aquamark n mp3/mpeg encoding, didnt issue any trouble, btw the aquamark score is 83841 with CPU/GFX both score 12.4k...
yeah...i have to set 1.475 at BIOS to get 1.45VCore, it seems like it didnt detect correct voltage?mobo's fault?
*
hehee.. if u say like tat. nice wan la else should encounter some problem whistling.gif
« Next Oldest · Overclockers United · Next Newest »
 

5 Pages « < 2 3 4 5 >Top
Topic ClosedOptions
 

Change to:
| Lo-Fi Version
 0.0469sec    0.46    7 queries    GZIP Disabled
Time is now: 4th December 2025 - 07:49 PM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.