QUDERN,

that chipset cooler is a modification of Arctic Freezer CPU Cooler



u can have it for RM 120 at Garage Sales...

RM 120 for chipset cooler.. what do u think

wuish...how do he mount that freezer ek din?..

i think u should read that thread sampai habis

http://www.dfi-street.com/forum/showthread...77&page=5&pp=15





This post has been edited by dinster: Sep 10 2005, 02:05 AM

hehe...tetiba malas plak ...ngeh ngeh

such a nice attempt there...

Has anyone tested the 704-2BTA bios? It works surprisingly well for me.

http://www.dfi-street.com/forum/showthread...ghlight=704-2BT

/Off-topic

Here's the leaked out specs of the DFi Lan Party UT Crossfire board

//Off-topic


Attached File(s)
 246445.pdf ( 51.27k ) Number of downloads: 16

I got my NF4 Infinity Ultra today... So i format my windows.. But the problem is i got 2 harddisk. 1 is PATA and 1 is SATA...
I want to install windows into SATA means SATA is the primary.. But when I install, windows detect my SATA harddisk as seconday means my SATA drive letter start with D. I try every setting in bios but cannot including updating BIOS... So i installed into D drive.. Now when boot into windows I need to boot using Win XP cd otherwise it will come out NTLDR missing... Anyone can help me with the windows installation problem?

could i know wat are the improvements u have seen? i'm currently on utt with 702-2.

kev_neville,

Does your PATA hdd contain a partition when u installed windows ? If it does, unplug the PATA hdd if you ever install windows in SATA hdd. After you finish installing everything, plug in back the PATA hdd.

try this,
1. set your cd/dvd-rom as your primary boot device
2. set your hdd is your 2nd boot device
3. give higher boot priority to your sata hdd than your pata hdd
4. reboot your pc without puting any CD

should boot into windows without a problem, cause i did it on my rig

best luck,
Evogenix

have u tried the steps i gave you...its quite the same as evogenix...give it a try and then lets us know of any problem...

I can run @ lower vcore and better compatibility with my RAMs.

how about TCCD's/TCC5????can the bios version improve the performance/stability for those ram based chips....????

stil the same... need cd to boot in win xp..

when u boot what does it displayed on the screen after the POST??

I use that bios and i run my TCCD using yellow slot instead of orange slot @ 2.7V. No problem for me so far.

take out the pata 1. after install plug back n configure bios. set primary as sata.

NTLOADER missing..
Press Ctrl+Alt+Del to restart

yerp....that is the notice i'm talking about...

the steps i gave u should eliminate the problem....have u tried evogenix's tips???

which sata port ur using 1,2,3,4,5,6,7,8???

1 but the problem is stil there... anyway may i ask if my DFI NF4 Ultra Infinity (non-LANPARTY) can use LANPARTY bios??