erm guys
i was just giving a good look at my mobo and i realised, there is no parallel printer port.... ?!?!?! how do i get that fixed eh??

Buy a USB printer

lol.. that's one problem of the NF4 boards... and the PCI slots as well hehe... i think can jual ur printer in garage sale soon? lol

Have any1 try oc with 4 stick of ram???

i might give that a go very soon.. have 4 sticks of TCCD on hand now..

hope u can tell me the result...
now what i can only go is 210Mhz 1:1 @2T @3.0V
my tccd isn't xl nor c25pt...
juz cmx512-3200 3-3-3-8.

i hv try out wif 1T use auto, and it can go wif 100MHZ for ram @2-2-2-5

kianwee...

have you test oc with the winnie u sold me...
kinda lazy to check it...
gpaw, not much info for 3200+.

Actually I have not overclocked that winnie before, because I bought it as a temporarily CPU. I have a friend who has the same stepping as mine and he is running at 240x10 now.

kianwee...sandiego 4000
wen wanna oc the baby must share n show off the result ya

No problem.

hello~ im new here~ just got my dfi sli-d with venice. does anyone setup like my system as well? can share ur result by PM me? cuz im lazzy to test out 1 by 1 ah.

1.dfi sli-d
2.a64 veni 3000+
3.winfast 6600gt sli ready
4.twinmos UTT winbond 2x512mb
5.with original cooler fan and heatsink
6.thermaltake 480watts true power

mostly the UTT need how much vdimm and the venice as well? by using the defaul cooler, will it goes up to 2300mzh with stable in games and running at acceptable temp?

thx

check ur venice and look for the stepping..

try some of this

flash to 618-2 bios
use yellow slots for ram

UTT with active cooling i'd say 3.4-3.5 for 24/7 use..
processor on stock heatsink 1.5-1.58max

if lazy then i don't think DFI board is suitable for u.. give it some time and tweak it..

thx bro~

don scold me like that ma~~ im lazy cuz i cant wait to see how is my new system performs le :-)

ok ok, with some of ur advice, ill try. will study more about this new baby set.

by the way, the heat issue of the mosfet when switch to 4v vdimm still remain? and the rams temp, must us a heat spreader? or just leave it nude better?

thx yo~

isn't it the thermaltake 480W is a 20pin PSU?

for SLI, i dun think a 480W will enough, read this thread start from page1.
u'll found that, even a 550W pure, the +12V will drop till 11.7~11.8V.

heh no scolding la..

go to www.zerowarranty.com and forums .. under motherboard section i posted some links + guide on flashing bios

better to cool as much as u can.. nude = good

my dfi belum masuk case before hehe

Anyone got anyproblem useing NVIDIA NFORCE4 Firewall ??

the firewall is a piece of crap.. lol don't install it

Lastnight i hv playing around wif my rig...
able to go 250Mhz 1:1 at 2-3-3-6 and 2-3-3-5, but i prefer 2-3-3-6....
vcore 1.41, stable at memtest #5 for 6hours, and also prime95...

and i found out something special...
i hv tried out to get 1T for 4 stick of ram...
and lastime i get is 100mhz DDR200 for ram...
and the latest try, i found that, by using the FSB divider, 5:3,
it shows up DDR400 at memtest... wif 18XXMbps tranfer rate...
suppose it should be 120mhz, using 5:3

This post has been edited by Westley: Jul 27 2005, 09:19 AM

noob is back again~ :-)

i like to know what is the meaning of 24/7 in the centense below???? can anyone help me?

here got 58 pages..... i only can read for around 4 to 6 pages per day... so when im gonna finish them all??? erk......

"UTT with active cooling i'd say 3.4-3.5 for 24/7 use"

24/7 is 24hours 7day in a week