hello~ im new here~ just got my dfi sli-d with venice. does anyone setup like my system as well? can share ur result by PM me? cuz im lazzy to test out 1 by 1 ah.

1.dfi sli-d
2.a64 veni 3000+
3.winfast 6600gt sli ready
4.twinmos UTT winbond 2x512mb
5.with original cooler fan and heatsink
6.thermaltake 480watts true power

mostly the UTT need how much vdimm and the venice as well? by using the defaul cooler, will it goes up to 2300mzh with stable in games and running at acceptable temp?

thx

thx bro~

don scold me like that ma~~ im lazy cuz i cant wait to see how is my new system performs le :-)

ok ok, with some of ur advice, ill try. will study more about this new baby set.

by the way, the heat issue of the mosfet when switch to 4v vdimm still remain? and the rams temp, must us a heat spreader? or just leave it nude better?

thx yo~

noob is back again~ :-)

i like to know what is the meaning of 24/7 in the centense below???? can anyone help me?

here got 58 pages..... i only can read for around 4 to 6 pages per day... so when im gonna finish them all??? erk......

"UTT with active cooling i'd say 3.4-3.5 for 24/7 use"

like to ask is anyone find out which type of cooler fan that can replace the original north brige cooler? my cooler already got noisy sounds comes out... cuz it is because got dust inside.

iceberg can fit in?????????????? damn good if like that!!!! do let me know the result ya! and let me know which model u using too.

many many thx!

oh no~ hopefully iceberg 4 can fits in.... update to me ya~ thx

ok~ ill get one for my self!

by the way, iceberg 4 pro can fi on x800 series card? is yes, offer me then. thx

This post has been edited by chinsc: Oct 16 2005, 09:24 AM

thx for the link, very nice info.

i think ill pull out from DFI mobo on my next system... cuz it's really too complicated la....

any troubleshoot website for DFI SLI board? my mobo suddently dead! sometimes can boot, sometimes not. when able to boot up, it shutdown directly after 1 or 2 minutes.... no matter it is in window or in dos. then it wont startup! when push the power button, the power LEd is on for a while... then it's stuck there for 10+ minutes... this is keep repeating... anyone can help?

problem solve... it was my PSU spoil... :-)

hi, need some info. im just upgrade my mobo to 2GB, which is 4 stick of 512mb. but it's automatic set to 2T command~

is this normal? if use back 1GB, it's back to 1T........

hopefully can be tune back manually... but, how??? oh ya, im use the latest officel bios.

er... need some advise here. im o/c my venice now. but ythe HTT can be adjusted? it's still running the same with FSB.

my o/c tuning is like this:

divider = cpu/fsb 6/5
FSB = 280
LDT = 3x

but i check with cpuid, the HTT still 280.

is this a bugs? ur im setup wrongly~

thx

oh i c~ so no matter how, FSB still running same with HTT?

im using DFI sli-d.

im trying to o/c it to 300fsb but my system is not stable. stop prme after 10s. is it because the HTT is too high? or my venice need more vdimm? im try on 1.63V only. didnt try out more)

thx

HTT = FSB.... so what we can do is only to adjust the FSB only but not the HTT lo? hem, so 300 HTT consider as high or not?

im gonna try to benchies my cpu at 2.7GH.

well, my full setup:

1.thermalright xp90c
2.coolermaster 450watss pure power PSU (i suspect this one also.. which this PSU is only a midrange product)
3.twinmos speed premium 1AA4t (CH5-UTT rams)

ok ok, will try to lower it down to 133 first.

hi all, anybody using the infenion special chip? i got a pair of team extreme 2G kit. use infenion special chip. can do 2-3-3-5 at DDR400. but can oc well. so i wonder which bios should i use to push it up.

thx