Ya for me.

-pWs-

Just a minor update from me guys, manage to shave a bit of vcore compared to when using my old gheygheybite..
Nothing spectacular tho, still pening with the undervolt & overvolting thingy with asus mobo



BTW ah_khoo, i manage to enable CnQ but i have to used the 2nd newest bios version.. The newest wouldn't let me change that option at all

Use the one you are using now first.....

no worry after sometimes sure they update the new one..

that result sure play² with vdimm..

Yup have to push my vdimm up to 1.65v if not surely cannot pass prime
Also i discovered something yesterday, with this ahsus mobo if u enable E1ST, every amount of vcore u input surely will somehow become undervolt..
Like when i set 1.3v with the E1ST on, when prime the voltage will drop to 1.286v
If i disable E1ST and just on the CnQ, the vcore won't undervolt at all, but the problem is even when CnQ put the speed at 800mhz the vcore will stick at what u set
Can u imagin running at 800mhz but using 1.3v

Seriously, everytime change a mobo its like having to learn how to oc again

it should like that.. EIST control the voltage..
CnQ manipulate the core frequency..
otherwise why give the user option..

---

Added on June 30, 2010, 10:40 amand again 0.02v different is quite normal..

This post has been edited by 8tvt: Jun 30 2010, 10:40 AM

Hahahaha, the problem is that E1ST causes the volt drops from 1.32v on idle to 1.284~1.296v when prime
It should be the other way around

it's normal la.. not that board only..
u must poke² that silver point with multimeter.. for a correct readings..

Hahahaha, have to buy multimeter la plak.. kekekeke..
No worries bro, still in the process of learning.. Hopefully will master this board soon

ala use normal multimeter is cheaper..
just poke the black one @ GND and red for others..
simple like makan sate with timun..

i have k9a2 platinum on my store
want to use it back , now dunno what the best proc to oc..
any suggestion ??..

shall i suggest X6? haha

ok thanks..i go for x6 then

FYI Phenom II X6 1055T 95W TDP is available..but i wonder if it arives here already? - -..

stop poisoning the x6 i cant take it anymore!!!!!

Hahahaha take the Phenom II X6 1055T, best tuh.. nyum nyum.. 3.5ghz below 1.3v sapsapsui.. hahahaha

must show example 1st leh... c3 come2...

Mine is an old and rusty C3 leh not some new & shiny 1055T, what example can i show

that's why i'm askin u to lead d crowd (includin my fren) by buyin one for yaself... once u buy d rest will follow...

This post has been edited by ah_khoo: Jul 1 2010, 01:35 AM

RAKSAKSA GORGON KUAT POISONING!!! Ha Ha Ha~