Guys what is the normal rate for Lipo is healthy, how many volts?

4.2v fully charged..

My ESky battery less than that .... for 3S type it is only 12.4V when fully charged. Average, each cell is only 4.13.

I used a multimeter to measure this so there might be problem with my multimeter also.

i see. i got an offer of 500 for futaba 2.4ghz, include lipo..is it ok?

more importantly is the cells charging/discharging evenly ... means batt is balanced and power is good and consistent
if one of the cells loses its charge very quick = batt going going gone liau
and u will hit low voltage very quick ..

lately i never SAYANG my lipos ... whack until lipo wanna die .. 3.2v/cell !! what to do ... rempit until almost no power to come back .. hahahaha

futaba 6ex 2.4ghz, comes with lipo, box, manual.. RM500, is it ok?

---

Added on April 20, 2010, 2:10 pmok the guys wanna sell the futaba 6ex 2.4 everything include lipo for 500 but prob is, it is mode 2.

he say can convert to mode 1, is that true?

also if it convert, how the stick movement, does it really like mode 1 tx (the throttle stays when moved while the elevator always get back to center)

This post has been edited by sLapshock: Apr 20 2010, 02:10 PM

rm500 for brand new or 2nd hand ??
package is radio + receiver + lipo ??

AFAIK all futaba radios are convertible to any of the 4 modes in the software
as for the throttle spring gimbal u have to do that manually or get the seller to do it for u if u are not sure

Ohhhh, slapshock you still using mode 1 for your lama?
I thought you have converted to mode 2 .......

rm500 for 2nd hand. everything included lipo. claim use only 2 months.

no ar, im still using mode 1. dont know wanted to change to mode 2 or not.

if truly only 2 months then MAYBE worth it depending on how desperate u are .. hehehehehe
go inspect the radio and see the condition 1st .. if by mail then i think better not la since u cannot see the ACTUAL CONDITION of the radio
6ex 2.4 + r617fs receiver + lipo + manual

alright, e617fs ar, not e606f

Hehe, I think I got myself the answer, it should be SWAATS in the Tx. Gonna try this after home.
I read from forum, -ve pitch handle the wind better but give you lesser thrust/lift. So is this something we can do to fly the 4G6 outdoor in a light wind condition, with a bit better?

QiW, you mentioned your esky controller also got glitch right on its aileron?

then let say if i bought another esky controller, do i need to replace the receiver on the lama or just use existing one with the newly bought esky tx?

is your ESKY 2.4 or mhz ??
if mhz then pull out the crystal from your old tx and put into new tx
if 2.4 then i think no need to do anything laa ... I THINK

how come the package comes with 6106 receiver one ?? it should be 617 receiver which is 7 channel .. 6106 is 6 channel and cheaper .. if 606 then rm500 not worth it liau

---

Added on April 20, 2010, 7:53 pmmy esky radio not gllitch coz no longer used for flying ..
its the potential meters going sticky sometimes .. like the controls ad jumpy and not smooth like that laa

This post has been edited by QiW: Apr 20 2010, 07:53 PM

owh ok i got it.

anyway i succesfully convert mode 1 to mode 2, and to my shock-ness... i can hover it already, its easier..!!

This post has been edited by sLapshock: Apr 21 2010, 12:54 AM

mode 2 is as real to a REAL HELI as it gets ....
alot of ppl find mode 2 easier after not being able to fly properly in mode 1
which heli did u hover ??

haha which heli i hover.

dont ask la i paiseh.

i oso kena my 1st poison from a coaxial laa .. have to start somewhere one maa .. hehehehe

Same here, all started with a 100 bucks coaxial heli. Then slowly, crash this heli everywhere and end up looking for a better one. Now my first love is not able to fly anymore ... pity ....

nvm .. now u got MORE LOVERS .. huahahahahaa