sigh, looks like it's impossible to get a musical sub within that price range eh

wa..EOL already.. SW250 not bad.. consider.. how the price?

Hi,

Can any sifus teach me how to setup the subs? the LFE shud i put advanced mode or settle with those preset (110,200,etc). I can really feel those preset have more bass but lot of distortion too.

I found this statement on SVS support " It is very important to verify that your receiver Sub-Out (LFE) channel is set to the same level as your front right and left channels. "

Is that mean all my speakers (front,rear ,center ) shud set at same crossover?

THanks

Let your avr do the crossover. Set your sub to 'bypass' for freq xo.

Btw, what speakers that you are using? Satelites normally above 100Hz. Capable loudspeakers can go lower than 60Hz. But, mostly recommend to set it at 80Hz.

Thanks for the info...i am using B&W684 as front, Q acoustic as center & energy satelite as surround...i checky my amp can set up to 250hz...can i set that high? or it will causing causing speaker koyak if set too high?

Thanks alot

setting crossover at high value such as 250Hz won't spoil your speakers.but why would you wanna do that? what's the frequency response for your center speaker? you might wanna match it with the subwoofer.

If that is the bass management crossover setting then I don't see any reason to set it at 250Hz. It would mean that freq below 250Hz is diverted from your speakers to your sub. The trouble is can your sub play up to 250Hz? Most subs can't and therefore you will have a gap in the freq response.

In other words your sub might play up to 150Hz, then your speakers play from 250Hz onwards. So there is a gap between 150-250Hz.

So as mentioned earlier, you might want to set it around 80-100Hz depending on the capability of your speakers. Also, there is no issue of causing your speaker to koyak if set too high. Please do some reading about crossovers and freq to understand what it's all about.

---

Added on September 16, 2010, 10:20 amI think what it means is to set them all to be the same loudness. Nothing to do with crossover.

You will need a SPL meter to do this.

This post has been edited by jchong: Sep 16 2010, 10:20 AM

anyone audit wharfedale 10gx sub? how is it compare with sw250?

The latest price for the DSP-3400 that I know of is ONLY RM3300.
Still don't believe it!!!

From what I know, its the S.. that is way overpice here in Bolehland.

Wow... declaring war again...

---

Added on September 18, 2010, 8:41 pmJust wondering how much to have DSP-3400 shipped to Johor?

This post has been edited by geforce1999: Sep 18 2010, 08:41 PM

Why don't you check out the price from SG? I'm sure must be pretty attractive from there

Bro, mind share where to get this sub at that price?

if it's war, guess some of us already knew which is at the losing end

war isn't the right word. more like pointing the facts and going against popular belief

My friend bought one in Miri for Rm3500. Go back in this thread and you can see someone bought it for RM3300 only. Good luck.

Just give a call to Asia Sound lor

logit85 don't believe in 400W Someone must convince him that it is indeed ULTRA powerful and that he doesn't nee kW of power.

NVM logit is getting sub 25... The first in Malaysia. Walaueh 4000w

King of ALL sub.

Asia Sound sibeh lansi, can't recall the apek name liao ... bugger typical brain damaged salesman talk damn kau a lot but all meaningless

This post has been edited by echoesian: Sep 18 2010, 10:59 PM

need a sifu to convince. ask the sub sifu to come talk to him