Is it exterior or interior?

Prickly? Whats material is that built of?

Undercoat is to provide better adhesion for paint, we called it seller. ’Undercoat’ used by painter for wood as primer coat.

Do remember all surfacr must be free of dust and oil, if not your time n money spend on painting will be wasted.

Murohond is a good pa8 nt from Australia, but remember how good the paint u used if got a wrong Painter... your money flies with tears

It is better to vacuum, mop and wipr with semi wet cloak

ICI Dulux Pentalite - any feedback for interior wall?

It should be ok if you din stick any sticker or tape on it, because when u remove it, perhaps it will leave stain or peeled of the paint,

What is the difference between ici easywash, except the washable part?

Did anyone ever do the wall painting at night? Is it advisable to do so? Any problem/ issue?

[quote=spreeeee,May 10 2016, 07:57 AM]What is the difference between ici easywash, except the washable part?

[/quote］

. Pentalite is low sheen compare with easywash.

This post has been edited by Ryannate: May 10 2016, 07:42 PM

Not recommended because you might end up lots of shades due to unevenly painting.

is this a good price for dulux ici (gst inclusive)?

Dulux ICI Pentalite
18L RM254.40

Dulux ICI Weathershield
20L RM318.00

but i not sure the weathershield is which of the following (found out from website):

-Dulux Weathershield Acrylic Exterior Wall Finish
-Dulux Weathershield Max Acrylic Exterior Wall Finish
-Dulux Weathershield PowerFlexx

products differences rely on old or new walls, self washable or % of sheen.

All can use, prefer better bonding and good hiding character (means when you apply single coat it is almost covered previous colour)

Some paints are cheap but with poor hiding character end up you have to paint few more coats and cost more expensive with an expensive paint with good hiding.

most likely Dulux Weathershield Acrylic Exterior Wall Finish

agreed with you

It's not just the finish coat to think about..

The moisture content of the painted surface will also affect adhesion of the final finish..

A quality sealer undercoat to prevent wasting the finishing coat (being absorbed into the dry cement)..

and correct technique.. Waiting each layer to dry properly before applying another coat..

If you're only looking at the final finish without knowing the basis then for sure it won't look as good or last as long..

This post has been edited by Richard: May 15 2016, 04:40 AM

I was only asking about prices.. not technique. However thanks for comment.

Hi

Anyone know how much the Nippon Weatherbond A pricing? And what the difference between second grade and first grade? Is there any difference or just gimmicky?

This post has been edited by mrbs84: May 24 2016, 08:09 PM

It is a good paint with decent price tag.

Hi guys,

Where can I find Jotun Jotaplast Max (0851 Windsor White) for a good price today? Which shops are open?

Hi ppl,

My ID told me my existing house does not need sealers or undercoat for the interior walls coz the existing paint is good enough. Is that true?

which paint has good bonding and hiding character? my ID told me i dun need to undercoat the existing wall paint. So i think i better buy a good final finish wall paint. but dunno which brand