No one reply me..
One more Q, how do i know CPS is ok? Any sign when it triggered?

when cps is not ok, check light will turn on.

i think the waja forum got a list. but normally you can take the car and check it out later. anything not right can be fixed during first service.

we normally hear a tick sound when rpm at 3800rpm for waja. some users hear it, some don't. maybe its the level of NVH in the car difference? mine i can hear quite obvious. you can feel the sudden oomph in your acceleration too...

Use 97 and the feeling is much more noticeable compared to 95. But VPower still the best.

Jctasoga, where did you do the boot soudproof? Maybe tomorrow will go and do it.

I almost finish reading CPS thread Version 2 and saw this :

1. Check through all the items in Proton Edar Check list.
2. Power window
3. Side Mirror – Function or not
4. Reverse Sensor
5. Body Paint
6. Door alignment / Easy open for Doors
7. Weather Strip condition
8. Check chassis number for the manufacture year.
9. Check for cushion on BaseLine model
10. Make sure the mileage is between 2-20km
…..(anything more than that you may reject the car)
11. Roof lining (check for fitting and no stains on it)
12. Try all the switches on Central console and switches on steering and stick switches.
13. check on paint matching on body, spoiler and bumpers
14. Make sure there is enough fuel to reach the nearest station.
15. Take the SA and drive for a short trip for inspection on driving.
16. Take your time for checking, do not pickup your car during rainy day and avoid afternoon and evening.

Get all this from forum… Maybe it useful…

Credit to pearjar

For my case, I just sign the form and take the car. Luckily got no problem.

Yeah, read your reply on CPS Thread V2 also

Ic.. talking bout light, which one should be valid appear for G2 CPS?



Waja & G2's CPS triggered at different RPM one? New unit can direct test? Or need to wait after 1k service?


Thanks ahpaul82 for dig out the list & thanks pearjar for the list.. Got some Question on red above
I visited the showroom to check my incoming, want to check the mileage but the battery is kong.. New unit battery also kong..

Btw, I googled and prepare one also, anything i missed out?




Attached thumbnail(s)

Can. Why cannot.

Tot the car need to pass 1k "probation period" first to avoid damage to engine?

The break-in already done on a machine before the engine is mounted in the chassis. And don't forget that the QC engineer already trashed out the car before it rolled out of the factory.

Does they (So called QC Engineer) did "trashed" each and single of the car?

You think they don't? I know I will. Even my SA told me to rev the car so any problem can be rectified early.

Warranty 5 years mar, got plenty time to rev kaw kaw..
u r one of the QC Engineer?

Nope, but knew one. Revving during the engine still new also will prevent metal debris (from manufacturing) from sticking so it can be flushed out during the 1k km service.

don't get cheat by 5 year warranty. Read the term and condition..

Refer above image,
Only two icons light are not valid...

Let's other answer for you...

This post has been edited by ahpaul82: Dec 19 2009, 10:30 AM

5. If it did rust, I still can't reject the unit right?
Depend on which part I guess. Some part are applied with anti rust, so if its still rusting, you can reject it.

8. How to check manufacture year thru chassis number??
No idea.

10. I tot the car already under your name, so easy can reject? How if the SA said the car is drive over/not bring over in contenna one? 100-150KM++ is acceptable?
100km I think is too much already. Afraid that the car might have been used as an unofficial test drive car.

11. What is this??
what 'what'?

16. Why need to avoid afternoon??
Actually, you should go when the sun is bright. Can easily see scratch, swirl, and dent.

All lights are on gen2 but some just for show.

Haha.. Took this from others forum as well.. Some ask me can reject if mileage? Not sure about 'reject' term, but if mileage are too high, afraid it is a nonofficial test car.. For evening
(dark), just to make sure we can check properly only. Maybe car is park at open area (raining/ hot afternoon), so we overlook some major thing.

---

Added on December 19, 2009, 11:25 amSecond row at the meddle. After engine temp, alarm, what icon is that?

This post has been edited by pearjar: Dec 19 2009, 11:25 AM