I never installed driver.
VTT seems to be not related with vcore.
adjusted to 1.425 in bios.
the max vcore range specified by AMD, according to some site.

HDD temp, not sure, for now is 48, this setup doesn't have anything.
no mobo driver, mobo monitor tools, graphic drivers, no sound card, and summore no network.
I just running for a test.

currently having an old school 939 rig with wc setup.
this 939 is on raid 1 which i can't monitor the temp from any software.

this is d best i can push so far, 50MHz shy of bro -pWs-'s attempt @ 3.8GHz w/ 1.424v usin his 0922CPMW (one of d best i've seen so far). a better chip @ lower clock if compared to d departed 0922APMW...

*p/s: sorry guys, attached d wrong ss, will update tonite... basically it's a 3.75GHz (250*15) w/ 1.424v attempt.. too slpy this morning...

This post has been edited by ah_khoo: Oct 6 2009, 08:59 AM

A little bit something that I tried just now....

Anybody installed true on A2/AM3 bracket? I have issue with the AM3 bracket supplied. Screw too short.

So far no wor,last time im using it on AM2 and no issue found!

Ur one is true extreem is it?

I use TRUE w/o bracket. Put on top saje.

-pWs-

waa sis... nampak nyer ade mobo baru...

another option is to cable tie d cooler...

Good option. Never think of that.
So I do not need to lay down the motherboard d. Haha.

-pWs-

Cable tie meh? Tie it to what sis?

u just need 8 cable tie, 4 as d tiang & 4 as d lock... u get what i mean bro?

in details, u need 8 cable tie w/ d head bigger than d mountin holes of cpu bracket. use 4 cable tie to serve as d long screws of d bracket, another 4 to lock d 4 long screws. pardon me for my bad england...

suitable for open case setup only coz sometimes d head is too big until u can't screw d mobo onto d mobo stands...

This post has been edited by ah_khoo: Oct 6 2009, 12:39 PM

Owhhhhh i see.. Kekekeke... Now i understand

Where got new mobo sis?

Just my old DK and new GD70!

Now wait for the right DDR3 ram to pop up! Abang oltromen kita kena blaja cakap Almond London la macam ni! ekekekeke!

BTW x de new info to poison us ke?

So far dengar TS wanna get a Propus! When erk?

This post has been edited by verdict: Oct 6 2009, 01:09 PM

Want to ask you guys' opinion.
Any pros & cons for Athlon II x4?

-pWs-

From reviews on the net so far not much con i believe..
The major downside i know is it's relatively high stock vcore but as most reviews point out u can actually cut the voltage to 1.1v and it still is stable running at stock clock
Even in some benchies it's memory latency is much better without the slower L3 cache..

wait for 630, w/ higher multi @ 14 = possible to hit higher clock... pre order available @ uk now...

btw, something for matx lovers...

http://forums.vr-zone.com/overclocking-baz...overclocks.html

This post has been edited by ah_khoo: Oct 6 2009, 02:19 PM

Thinking to change this processor from E7400.

-pWs-

Tukar bro jgn x tukar

Buy a megashadow, wif am3 bracket u like to install any direction u wish.

consider a USD$99 item.
with a 200mhz up, the extra payment seems not that worth.
btw, 635 and 640 coming soon too.

no idea on how well real propus fares in htt oc bro, but judgin from my past experience w/ x4 810 which has d same multi like d 620, htt seems to max out @ 27x for prime stable, 3d stable mite be able to go up to 28x~29x. but there's no way to go beyond 300htt @ 13x multi, thus mileage will be limited. so in this case, higher multi definitely helps. but again, who know propus can be d next venice which can clock pretty well on htt.

This post has been edited by ah_khoo: Oct 6 2009, 05:31 PM

hi guys, juz wan to know is it worth it to buy msi 790fx gd70??