corrected...

my new thread resolution is not to become top spammer again...

major concern is d tdp, however, there'll be lower tdp version of 965be so worry not.

yup, what is important is d speed detected correctly, d rest is just for eye candy...

woaahhh.... gd70...

btw, if any of u guys need to find coolin for d pwm (especially biostar 790gx boards), i would suggest ocz xtc ram cooler v2, it fitted pretty well on my 790gx a3+. just remove d clamps & zip/cable tie it to d 8 pins cable from d psu...

This post has been edited by ah_khoo: Sep 23 2009, 11:15 AM

if u can afford gd70, ur not far from gettin ya hands on i-7-eleven platform.

imo d 4 * pci-e x16 ports is abit "lebih", if i were to cfx, i would choose i7 instead of amd for max performance...

This post has been edited by ah_khoo: Sep 23 2009, 11:54 AM

that's why he's movin to i7 mah... he must have lotsa gfx cards lyin around, coz x58 boards usually come w/ 3 * pci-e x16 ports rite?

we sure have lotsa freaks in amd thread, in bro -pWs-, we got a foldin freak, while u for spi/wprime.

i only care bout those chips that i can afford, that's why i don't give a feck to i7. however, second hand i5 mite be a reason for me to embrace intel again...

same here, i doubt my 3850s which bought over a year ago had been fully utilized w/ games, now they become like geforce 2 mx while geforce 4 were widely used.

i find it more economy/affordable playin w/ chip + ram coz usually they wont cost as much as gfx. tweakin is fun but nowadays oc has been made easy by less effort needed to achieve high clock, but still, it's d only hobby i have here in sgp... sound kinda lifeless i guess...

on contrary, i was a cpu/board swinger b4, gfx (low to mid range) was only a side hobby as i never really into gamin that much. it all started when i purchased abit nf-7, then d nf2 infinity which made me madly in luv w/ dfi boards. then came s939 era where amd was d performance king, managed to taste dfi lp nf3, nf4 sli & expert w/ 0516 venice, x2 3800+ e3 & few x2 4x00. madness @ its max when intel took back d performance crown w/ d intro of c2d. tried x2 3600+, x2 3800+ f2&f3, x2 5000+ be, 9600, 9550, 9750, 9950be, 7750be, x3 720be, x4 810 & d x2 550be now with boards such as ax78, 790gx a2+, 790gx 128m, ut 790fx, dk 790fxb, jr790gx, 790gxe 128m and d latest 790gx a3+. was abit lucky to get few pair of affordable but quite ok ram along d journey. d most unforgettable pair would be patriot tccd which managed to prime stable @ 310MHz @ 2.5-4-3-x.

best buy of all = x4 810 (bought @ $140, sold @ $150)

worst buy of all = 0516 venice (bought @ rm7xx iirc, sold @ $40)

ehh, abit off topic ledi, better stop now...

This post has been edited by ah_khoo: Sep 23 2009, 02:27 PM

lemme guess, runnin on ddr1066 divider on auto timing?

it's hard to boot w/ ddr1066 w/ some ram unless u manually adjust d main timing. details bout ya ram? i think sis xixo can help on this. my not really gud in ram tweakin...

eg: my kvr can boot @ 1600 @ 9-8-8-x w/ ddr1333 divider but on ddr1600 divider, i need to loosen it to 9-11-11-x...

This post has been edited by ah_khoo: Sep 23 2009, 05:35 PM

even w/ ddr800 divider?

u can try:

1. clear cmos
2. boot w/ 1 stick (test all 4 slots)
3. set ram divider to ddr800
4. if can boot shutdown & installa another stick @ dc position.
5. set htt @ 267 w/ lax timin like 5-5-5-x if u die die must get d ram to run at 1066

cilaka lu sis, metang2 bulang pose dah abih buleh shoot auntie sesuka hati yer...

hmmm... iirc i faced that kinda problem b4, lemme think hard whether i can recall what was d culprit...

mebe can try by lowerin divider to dd667 or 533?

last resort is plug out d hdd & pop it into another rig & back up d stuffs on desktop.

it does sound like os corruption...

how can we not look at d model 1st... if compare d 2, d nos are nothing...

prime stable? voltage? this is killin me as i'm resistin performance ram atm...

which model ur referrin to bro? model of ram or model of car or d babe?



to change or not to change? currently thinkin of joinin bro cloudwan as gaygaybite fans...

This post has been edited by ah_khoo: Sep 24 2009, 02:45 PM

wish to join but cfo advise d other way round coz d board costs a staggerin $283, guess what board is that...

all d best, hope d cooler will fit well onto ya board bro...

btw, after 2 weeks of huff & puff...

This post has been edited by ah_khoo: Sep 26 2009, 07:01 AM


Attached thumbnail(s)

experience told me if one uses ddr1066 divider, he gotta sacrifice on timing. better use ddr800 divider + htt oc to clock it up to 1066, can have tighter timin & possibly higher mileage.

This post has been edited by ah_khoo: Sep 26 2009, 07:19 AM

new toy, advance gift from my beloved wife...

this is d furthest i can go so far, defnitely not totally stable, just a quick test only... i believe d wall is gettin near as AMD imc is inferior to its counterpart.

premium ram bro, price wont be so pocket friendly but still affordable if "tersepak duit tepi jalan".

sellin off ya stuffs eh? foldin no more? time to get a budget AMD rig bro... u want d ahem2 chip? no problem shippin it back to u if u need one...

spot on sir, but i didn't know it's of d9kpv...

d new bios for 785 evo has cpu-nb vid adjust from what i heard, i guess u sold off d board ledi, don't u?

won't be extreme to d extent of pryin off d heat spreader sir, not really bothered what chipset is used, as long as d ram can do d job will do.

voltage used was @ 1.6v, so i guess they use elpida chipset on this serie.

gd70, i rike.. for sure it got tonnes of tweakin options inside d bios...



really depend on d p95 setting, if u leave it on default blend test, d time taken for one particular test is 15 mins. usually blend test start @ 1024k (ram portion i supposed) and last for 15 mins only, then d next test is @ 8k which is @ cpu/l2 cache. so 20 mins of that kinda setting really not sufficient enuf to justify d stability of ram imo.

iirc, only 980a chipset can do core unlockin...

This post has been edited by ah_khoo: Sep 27 2009, 05:25 PM