bro, that was dk only leh... no ut... rog is top of d line board from a$u$ wor...

*a$u$ bashin mode ON...

This post has been edited by ah_khoo: Nov 12 2009, 09:26 AM

wht is mean fsb:dram = 1:2?

meaning that if your htt (fsb in older architecture where there's no bulit in memory controller) is @ 200MHz, ya ram will run @ 400MHz, effective freq would be 400MHz * 2 since it's ddr. in other words, it's a ddr800 divider.

This post has been edited by ah_khoo: Nov 12 2009, 09:36 AM

He He He! dok baik mu neyh! hentam a$u$! ekekeke! dose mu tau dop!

Interesting, maybe the newer sb750 make the difference. tho the kuma still prolly don't deserve the so-called Black-Edition gimmicks.




Btw, if you really interested in "save d earth" LOL mode, try Crystal cpuid. It enable you to idle your cpu at as low as 0.775Vcore yet all the number-crunching power of ur cpu kick in when it's needed. Much better then the default "cool n quiet" from amd.


THe author actually call it "Crystal n quiet"

This post has been edited by InFe_eD: Nov 12 2009, 10:51 AM

overclocking never same.. different chipset wooo

yup. different chipset, different story. i've use asus crosshair ii before. its a good board, but during my time, heat is the issue. my Pii 940 temp at idle >45C. when at load, it can reach 60C. (at stock speed). some says that crosshair ii and phenom II is not a good combination, but i'm not so sure. now i'm using dfi, the temp at idle is 36-38C.

that's why i said cooling issue factor..
some more, ah_khoo's oc skill range at dewa tahap ke tujuh

lol. then, i have to learn hikmat OC from ah_khoo la. he's oredi at tahap ke tujuh. btw, what is the normal north bridge & south bridge temp for my mobo? is >60C normal?

ye ke sis, menganjing lah tu...

if i'm @ level 7 then u & others are way above me...

it's kinda sad to see nvdia in its current state, they used to produced great chipsets for amd. after d gud old nf4, things haven't really go well for 'em. however, heat is not a new issue even back to d nf2/nf4 era...

bab2 hikmat gi carik master xixo... me just a stubborn old man w/ some free time to tweak pc @ nite (since i dun have much friends here & i dun go clubbin at all). u can virtually forget bout sb temp, as long as it's not reachin boilin point...

790fx is hotter if compared to 790gx. did u actively cool ya nb cooler? 790fxb has weird placement of nb... kinda hard to find a 3rd party nb cooler for it...

This post has been edited by ah_khoo: Nov 12 2009, 02:50 PM

what do u mean by actively? i didnt change to other cooler. just use the stock one.

rite now my pc is collecting dust only. i've sold the gts 250 and dont have other gc to use.

actively cool means u put fan to blow @ d nb cooler. this is what i did when i owned an fxb b4...



load temp during afternoon (non aircond room)

http://forum.lowyat.net/index.php?act=Atta...=post&id=826631

This post has been edited by ah_khoo: Nov 12 2009, 02:31 PM

Oo. i didnt add other fan to it. never think of it before.

is that ur pc? i noticed u use the orange ram slot. i read somewhere, we should use the ram slot that is closest to the proc. in this case the yellow slot. does it have any different?

used to be my pc, d only item left now is d gfx. my ex twinmos ram clock evenly well on both, so i put 'em @ further slots for better air ventilation...

\


mcm mana aku nk kurangkan fsm:dram
sbb kalu aku oc lbh dari 3.2 je x stabil...
aku try oc

200 x 15.5=3.1
ram freq 400 x 2 =800

tp klau aku try

213 x 15.5 = 3.3
rem freq =852
bila oc mcm ni je...kmptr aku rstart..

kalu aku try (200 x (16x -----> 17.5x))
blue screen...aku nk ubah mltple xleh...
nk naikan core pun blue screen..mcm mana?

so, it doesnt matter which slot? as long as it can run smoothly @ stock clock and stock voltage? newbie here.

most probably that's the limit... since ur vcore touched at unacceptable voltage, i do hope you pray for the miracles
otherwise stay at 3.1ghz.. it's overclock a few percent rite?

if possible pls provide ss like those that i've posted earlier on, a peekture say a thousand words...

can u try these setting:

cpu @ 12 * 250 w/ 1.3v vcore, bump htt volt a notch or 2
ram @ ddr667
ht link & nb multi @ 8, bump vimc (if available) a notch or 2

if stable, just raise d cpu multi to 13 & try again. i always prefer htt + multi oc in order to get sweet spot for cpu clock, nb freq + ram instead of just do plain multi oc...

no one can tell unless u try it out yaself. trial & error is always one of d ways to push ya stuffs further... just make sure u know what ur doin will do.

This post has been edited by ah_khoo: Nov 12 2009, 03:13 PM

i dont know i try down my multple
but cant boot la...only black screen...

ok.. i try to pun picture but guy can tell me how to put small pctre at forum?

upload using attachment lolyat punya