yes sir, unstable is becuz of wat? the vcore to high?

then the multiplier i only set to 18 only wor, i dun hav time to play wif it yet, now exam

hmm, show more details about the overclock?
show all clock and voltage.

pros please la...

wait after exam

can anyone recommend a low cost AM3 motherboard (around rm200) that can be used to unlock Phenom II x2 555 ?

Hi guys, need some help and advice regarding motherboard listed below ..

1) Asrock N68-VS3 UCC
2) Gigabyte GA-M68MT-S2
3) Gigabyte GA-78LMT-S2P
4) MSI 760GM-P33
5) MSI NF725GM-P43

Featured needed is able to unlock CPU cores ... kindly share some experience if any of u ever used mobo listed above .. TQ notworthy.gif

don't get nvidia chipset, the thing is ancient.

http://www.overclock.net/t/946407/amd-moth...nformation-list

Assuming you're asking/looking for a budget/entry level board for unlocking, i have used and tested three model, ASROCK N68-S3 UCC, ASROCK N68-VS3 UCC and ASUS M5A78L-MLX
and what i can say is ASROCK N68-S3 is the best out of three. i was able to unlock a phenomII x2 555BE 3.2GHz into fully working and stable quad-core b55 using all three board, but only ASROCK N68-S3 was able to achieve 3.7GHz stable running 30minutes prime95 (air-conditioned room). the other two board was only able to reach 3.6 (but that is only after increasing the vcore).

as far as undervoltage goes, none of the three capable of intelligently undervolt. meaning that the voltage stays at the value i set, be it when cool n' quiet activate to slows down the processor or at full speed. from my experience, this doesn't happen on higher-end boards.

unlock 6th core

Processor : AMD Phenom II x4 960T
Ram : Corsair Vengeance 1600Mhz 4GBx2 DDR3
MOBO : MSI 970A-G45

*running 6 core @3.4Ghz*


Attached thumbnail(s)

what is your CPU stepping?

Is the core temp normally high? when i unlock idle will get 62-63 degrees C. My cpu temp 38 degrees only

according to CPU-Z
Stepping : 0
Revision : PH-E0

http://valid.canardpc.com/show_oc.php?id=2303426

is that helping?

referring to the writings on cpu heatspreader.

After finalizing the test let me know the results. If it is cool I want to mod also

sorry for very late reply. just cleaning the cpu cooler. hope this help

CCBBE CB, nice info bro.

This post has been edited by saturn85: Apr 14 2012, 12:41 AM

my 960t unlock to 6 core also this stepping (bought from otara previously) :

CCBBE CB

didnt have time to post screenshot yet as I didnt try to OC yet (running at stock 3ghz and voltage currently)

i cannot unlock my 720 to 4th core..
verry frustrated...use cheap mobo m4n68t..

hello guys. i got my 960t unlock to 6-core and manage to overclock it to 3.95. u may refer to my siggy. already tested it with prime95 and no crash or error for continuous 2hours. but last night when i was playing games, black screen and crash. so rite now want to know if better for me go for 4-cores @ 4.0Ghz or 6-cores @ 3.85Ghz? i already tried pushing my proc to 4.0Ghz @ 6-cores but not stable.

This post has been edited by ketapang: Apr 14 2012, 04:31 PM

gaming: 4-cores @ 4.0Ghz.
folding@home: 6-cores @ 3.85Ghz.

This post has been edited by saturn85: Apr 17 2012, 04:13 AM