now i am running at 3.2GHz...

ACC set to +2% for Core 1, and 0 for the other 3...

run Prime95, 1 of the worker would terminate after 1 min...

how to make the 4th core stable???

x3 w/ unlocked 4th core. someone in xs or where (can't remember due to agin problem) applied acc to his 940be, it works too.

i was workin mah... i wear casual later kena fired by my boss how...

name me atx boards w/ 2 dimm slots bro, u can hardly find one...

but unlockin of x3 on 790fxb is not stable enuf. jr 790gx however pwn all... i saw a 0904 doin 3.3GHz prime stable w/ 1.3v only. d best i've seen so far on ddr2 boards.

yup, that's what i saw just now...

vcore bro?

tried others value for core 1?

This post has been edited by ah_khoo: Mar 27 2009, 03:32 PM

So far 3.0ghz...
3.1ghz not stable. Should be my mobo problem...
For temp, can go below 40 in ac room...

---

Added on March 27, 2009, 3:32 pmErm...Not sure
Still choosing between Jetway ha03-ultra and ma3-79gdg...
But I saw at overclock.net, most of the 7750 users can get 3.1ghz stable on biostar 790gx 128m...Can't find any jetway user there.

This post has been edited by XiuKeong: Mar 27 2009, 03:32 PM


Attached thumbnail(s)

nowadays, i cant find 4800 T.T
if can sure i sapu ma.
oso is ocing amd hard?
tried oc my bro pc.
hard LOL.
till i beh tahan then i reset CMOS oni.

Yup mostly m-atx mobo have the 2 dimm slot type, like Ahsos M2N68 or MSI K9N6PGM2-V..

It's hard for me at 1st but you need patience

juz tried +4%, failed also...

volage is default...

btw, how do u know it must be core 1???

ermm... it's ya choice on d mobo. 7750b.e @ 3.2GHz is quite common on decent boards.

intel quaddies hard to c too... amd b.e chips way easier...

coz i got a board that can't run blend test on crippled core. i ran 4 instances on blend test w/ each assigned to each core. run core 0, fine > run core 1 1, system locked up.hard reset windows, run 4 instances of prime again. start core 0, 2, & 3, prime runnin fine. but once i start core 1, system locked up immediately...

what is d volt shown in cpu-z?

This post has been edited by ah_khoo: Mar 27 2009, 03:46 PM

but it seems that all the kuma i see in here cannot go pass 3.0ghz even 3.1ghz is a struggle....

+6% failed also...

rig restart while running Prime95

yeah, AMD is not so easy to OC, if so easy our thread oledi 'cap lap'(bankrap) early...

lol.
erm so what should i buy.
confused d.
i need proc, mobo, ram, psu.
GC i got 3870 from my last rig.
i duwan sell it coz i know i will buy a new rig.

finally...

3.2GHz, +4%, VCore 1.39V... passed 1 test at least...

but still, i dun understand y it must be core 1...

---

Added on March 27, 2009, 3:56 pmfor ur budget, juz go for Phenom II x3 720BE, a good heatsink, and oc it kaw kaw...

even without the 4th core it's already a nice CPU...

if not for bro ah_khoo selling, i would ve juz grabbed a new 0907 batch 720BE and play with it...

This post has been edited by astria: Mar 27 2009, 03:57 PM

can quote the price for me?
where is your old proc astria?

under my bed... XD

going to sell it away soon...

sell it to me.
btw what proc?

lol, it's a Athlon x2 5200+ Brisbane... buti at SG leh, how u want me to sell u???

somemore still got 2.5yr of warranty left...

pos cannot ar?
tot 3800+.
better i buy 7750+BE rite?

k10 perform better

summore its oni below 300. with ta790gx 400++
ram 300 1k,
cooler CCF +-180.