btw, in the Biostar BIOS, if i want to pump the voltage for the CPU, which page should i go???

should it be CPU FID/VID Control, or Voltage Configuration in the T-Series page?

---

Added on March 27, 2009, 3:03 pm45W Athlon x2...

This post has been edited by astria: Mar 27 2009, 03:03 PM

ok, but it's an agena so don't put too much expectation of it, i'd say 3.3~3.4GHz is d max for 24/7 depend on cooling.

advantage of b.e is d unlocked multi, much more freedom in oc & more combination of htt + cpu multi.

u'll be surprise that d temp will stay almost d same even w/ few bumps of voltage. deneb really gud in temp especially w/ 3 cores, it's super cool...

ddr2 = dfi 790fxb
ddr3 = biostar 790gx (more power phase but still w/ d screwed layout - primary pci-e slot in d middle of nowhere )

why not get 4gb instead? if u want high speed ddr1066 will do d job well enuf, thou i'd recommend get a pair of ddr2 800 & clock d hell outta it, save $$$ + some fun playin around. just my 2 cents thou.

talk is cheap bro, d diff between kumar & heka is huge for poor man like me...

dfi... cough... cough...

try to play w/ diff acc value for each core bro, core 1 (2nd core) is d crippled core. try w/ diff acc values for that particular core while set 0 to others. u'll find one which is most stable. i did this on my fxb, should have some similarities i guess.



This post has been edited by ah_khoo: Mar 27 2009, 03:09 PM

i wan oc oso ba. so i ask here lol.
if not i take new one oni 800 T.T

DFI good ar?


This post has been edited by bobiac: Mar 27 2009, 03:07 PM

Ish...ah khoo poor
Is it time to get mobo with ddr3 compatible now?

other non BE CPU also can oc la... juz that u dun get to play with the multiplier...

well for me i set the core voltage 1st at the core vid either stock or higher and then i play the voltage in the cpu over voltage to get the right amount of voltage i needed...

ah_khoo whats ur way of setting on the GX3?

yes i'm poor, ask bro astria he'll tell u i dressed like begger when i passed d chip to him...

answer is no, not w/ 790gx/fx.

for starters like bobiac & i, be chip does make our lives easier...

core 0 = 0%
core 1 = -12%
core 2 = 0%
core 3 = 0%

from what i read in xs, weaker core should be assigned + value (more juice will be supplied), but strange enuf for my case -12 just fitted well. imo d trick is one need to find out d weaker/crippled core 1st, once it's done ya live will be less miserable. i can't guarantee prime stable thou as i only tried it on my fxb which can never be prime stable (blend test) & around 6 hours on 790gx3...

This post has been edited by ah_khoo: Mar 27 2009, 04:50 PM

so the overvoltage page is more like fine tuning???

bro this is meant for X3 or X4 clocking..?

if u beggar then wat am i... i even more casual than u hor that day...

So I should go for 4 ddr2 ram slots?

ha..ha..ha... to me it is... dont know if it is actually for other reason...

weee so BE is my choice. if 720BE can u all teach me how to unlock the 4th core?

only the 0904 batch (ie 2009 Week 4) x3 can unlock, 710 included...

now in market i see are 0907... all these confirm cannot...

yes u should bro just go for any 790 chipset u like( ) since ddr3 mobo with newer chipset is on delay flight...

---

Added on March 27, 2009, 3:18 pmbro bobiac u actually in M'sia or s'pore coz i think robyncom still have a few left for 0904 batch.....

doesn't hurt too call them and ask...

This post has been edited by fuzore: Mar 27 2009, 03:18 PM

dem now i got another prob T.T
how should i know 0904 or 0907 dem.
so back to x2 ahaha.

check the CPU itself...

got engrave on it one...

SG here long ago dun ve 0904... so when bro ah_khoo let go of his, straight away go and grab it... lol

This post has been edited by astria: Mar 27 2009, 03:21 PM

yes u can see it written on top of the procs bro...

Ish poison ni...
*Must wait for new proc*

xiukeong, have u tried oc ur proc?
how far can it go?